Jump to content
SAU Community

Noise Related To New Split Dump Pipe...

petgts4

By petgts4,
in Engines & Forced Induction

 Share

Recommended Posts

petgts4 Contributor

petgts4

Posted
Posted

I tried searching but had no luck!

I just installed a stainless steel split dump pipe onto my r32 (rb25 turbo), and immediately i noticed a strange noise that occurs only between around 2000-4000rpm... It sounds like the noise you make when you blow on the top of a bottle, but really loud!

It's as if the air inside the dump pipe is resonating when a certain amount of exhaust gas flow through it.

Anyone else had this happen after swapping their dump pipe for an aftermarket one?

Cheers!

mad082 Grand Master

mad082

Posted
Posted

was it a cheaper dump pipe (like off ebay)? it may be that the wastegate pipe isn't properly lined up with the hole, so it has a flap in there that is altering the airflow. mine had this, but i just took to it with a diegrinder.

EvilINGT Community Regular

EvilINGT

Posted
Posted

I get a similar sound, sort of like alternator whine, but it doesnt come through the speakers, funny. BATMBLS spilt dump, i dont care though as usually the stereo is right up and i cant hear it :P.

cheers

Evil

Liz Grand Master

Liz

Posted
Posted
was it a cheaper dump pipe (like off ebay)? it may be that the wastegate pipe isn't properly lined up with the hole, so it has a flap in there that is altering the airflow. mine had this, but i just took to it with a diegrinder.

yes, that sounds likely.

just take it off and have a look at the piping, could be as simple as the welds not being ground back.

maccattack Proficient

maccattack

Posted
Posted

Stainless dumps are made of thinner material than the standard cast dumps. They do tend to resonate more, not only because of the airflow but sound from the engine. You will always get a change in engine note with stainless dumps.

petgts4 Contributor

petgts4

Posted
  • Author
Posted (edited)

I took a look at the inside of the dump pipe, and it does have a bit of a metal flap at the wastegate return section that could be causing the noise. Thanks mad082, i'll get my diegrinder out and hopefully that will sort it out!

Cillham, i did notice that full boost is reached a bit quicker which is probably due to the gases flowing out more freely, so if anything, it's an improvement.

Thanks for the replies guys!

:P

Edited by petgts4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      newbie attempts the GTR life.

      By sunsetR33 · Posted

      Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • codygrimm27
      Attesa pump mount options / ideas? R32 gtr style.

      By codygrimm27 · Posted

      Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • GTR_JOEY
      EOI - Genuine R32 GTR N1 Rear pods and side skirts

      By GTR_JOEY · Posted

      Sounds perfect! Stay in touch
    • luke gtr
      EOI - Genuine R32 GTR N1 Rear pods and side skirts

      By luke gtr · Posted

      Not ready yet, but maybe later in the year?
×
×
  • Create New...