Jump to content
SAU Community

Recommended Posts

Hey all,

Last weekend my mate and I installed a 2nd hand RB20 box. That went all good but once we started it there was a rattle.

This rattle is present anytime the input shaft is spinning. ie Any gear while the clutch is out.

Can't really tell if it rattles in 4th due to road noise but it definitely rattles in Neutral, 1st and 2nd according to RPM.

Other than that it seems there is no whining or that loud bearing (forgot which one) noise with the clutch out which is common for all Skylines.

Does anyone know what could be making the rattling noise and if it will cause further damage the more I drive it?

Put it simply, is my box f!@#ed? ;)

Thanks

Link to comment
https://www.sau.com.au/forums/topic/131470-rattling-from-gearbox-rb20/
Share on other sites

What actually happens, as in damage, when this bearing lets go?

I went on a long drive and at the end of it developed a loud rattle from the gearbox. When I pressed the clutch pedal down the rattle disappeard and was told it was my thrust bearing on its way. I managed to get the car home, 200kms, and the rattle got louder and louder but I made it. Didnt drive it for two months but when I decided to take it round the block as soon as I dipped the clutch pedal to roll around the roundabout to come back the wheels violently locked up and it stalled. I was in second at the time but from what I can tell the box is locked in fourth.

Doesnt matter where I throw the lever its stuck in fourth?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let's face it. 90s turbo 6 with 80s tech in it is not going to be the thing that runs as clean as a whistle.
    • No. See below. No. In the specific case of Enthusiast, the wording in the PDS says, explicitly, " We will not pay any claim on a Vehicle with any Modifications not agreed by us and not listed in the Schedule. This includes any Modifications or the fitting of a device that contravenes the requirements of the Australian Design Rules [ADRs] or where allowed, the Australian Vehicle Standards Rules [AVSR]." The 2nd paragraph needs to be read in a different tone of voice from the 1st. The two concepts are connected, but they are two different concepts. The 1st says your mods must be listed and agreed with us. The 2nd effectively says "we won't pay if any mods are not legal". The way that it has been written in more general insurances for a long time has been that if the mod contributes to the accident then you're shit out of luck, but if the mod didn't contribute, then you'll probably get away with it. With "probably" being a very flexible term, and being an insurance company, better left untested than hoped on!
    • I'm not surprised, I favour a bit of a richer tune which for sure isn't helping the emission numbers.  
    • Overboosting is more likely a function of whatever boost controller you are using than the actuator. "Overboosting" is a feature of cheap boost tee type control. If you don't want to see peaks of overboost, you have to set it to not produce them. And that then means you don't run as much boost as you might like elsewhere. That's just life. Electronic boost controllers can generally be set to do a much better job of managing the peak boost.
    • Had a good chuckle because it is listing THC g/km. Though it is not tetrahydrocannabinol but total hydrocarbons. Interesting how the numbers seem so much worse compared to Greg's big V8.
×
×
  • Create New...