Tangles Posted August 10, 2009 Share Posted August 10, 2009 Im purchasing a AEM F/IC-8 for $350 USD delivered. Supplues fuel mapping, injection alterations and ignition timing maps over 21x17 so that will give me heaps of scope to drop in the 480cc injectors and retune, selling the safc/sitc combo afterwards here comes 260kw Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4760550 Share on other sites More sharing options...
vladau Posted August 19, 2009 Share Posted August 19, 2009 just found this thread glad there are others on this forum who like autos! thinking about getting a shift kit for my r33, where do i go to get one and how much am i looking at for parts and labor? Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4777597 Share on other sites More sharing options...
Fastrotor Posted August 19, 2009 Share Posted August 19, 2009 Call Mike at M V Automatics in Adelaide , as ask for a price on a shift kit. Also get him to supply a service kit as well.... think its included anyway but best to ask. Others will have to recommend workshops in your local area to do the job. But most shops could do it easy enough. Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4777805 Share on other sites More sharing options...
vladau Posted August 20, 2009 Share Posted August 20, 2009 who do i talk to about getting a high stall Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4778700 Share on other sites More sharing options...
Fastrotor Posted August 20, 2009 Share Posted August 20, 2009 Once again, talk to Mike at M V Auto's in Adelaide Sounds like you might be well served just calling and telling him what you want to achieve from the car and see what he reccomends. Don't forget to account for going larger later on..(it almost always happens haha) Do yourself a favour and get a good sized trans oil cooler. I used a davies craig one inline with the stock calsonic one. Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4778914 Share on other sites More sharing options...
Fastrotor Posted August 20, 2009 Share Posted August 20, 2009 Stan, Just re-reading your post, and i have to say, i highly doubt you'll get an extra 2-300 rwhp out of it !!!! I estimate a max of about 70 rwhp or 50 rwkw's extra .. So up around 420 rwkw. I'd be happy to be wrong for sure, but going on the Hp rating of that turbo and working on a conservative (for auto with a medium stall) 15% driveline loss , thats my prediction Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4778961 Share on other sites More sharing options...
PSY31 Posted September 18, 2009 Share Posted September 18, 2009 Just got my R31 back from the dyno after tuning - modes so far are... RB25DET Shift kitted & manualised RE4R01 Saber FMIC Custom 3" exhaust from turbo to tailpipe with 4" steel cat No name pod filter - AFM removed LinkPLUS 98RON 200.1kw at the tyres - 10psi of boost bigger injectors and GT3071 coming shortly Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4833961 Share on other sites More sharing options...
Haines Posted September 18, 2009 Share Posted September 18, 2009 Ive just changed the .73 internal gate to a .82 external gated setup see if that makes a difference to it now Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4834379 Share on other sites More sharing options...
Fastrotor Posted October 30, 2009 Share Posted October 30, 2009 Any updates auto guys ? Hows the new housing Peter? HEY STAN , love the car in the Magazine mate, congrats !!! My build has stepped up to the next level now. After alot of deliberation, i've decided to go to the rb26 head, and twin turbo's. The 3L bottom end is apparently nearly ready. Its now costing quite alot ...... its costing me over $2k just to buy all the GTR stuff i need (thanks johno) ! Then the head work and cams will top $5K , so that will happen next year at this rate. I'll be happy to have the bottom end and all parts bar turbo's paid for by chrissy. Aim is 400+rwkw on pump , and 450+rwkw on E85 (Or more likely 60/40 methanol/petrol) . Going to talk to Mike at MV about a transbrake too... but i think he isn't keen on them in jatco's from memory. Need to discuss getting current 3500 converter dyno'd or tested anyway, as its slipping alot more top end than the 2800, considerably so .... Also , i will be swapping the LINK G4 plugin (of which i've wired in every extra input available !! haha) over to the LINK G4 EXTREME. Reason being , aside from the extra analogue in's i require, it can drive the low impedance injectors directly with its peak&hold drivers (means it will allow much better control over LARGE injectors (1000cc+) at the low end, idle etc. Also twin knock sensor inputs directly. Extra ignition so no more waste spark needed too. And i'll build another tech edge wideband controller and run two of them to the link for logging and quicktune ! Ah its going to be fun ! Can't wait to be finally back on the dyno tuning it ..... Anyway, back to lurking. Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4910172 Share on other sites More sharing options...
Haines Posted October 31, 2009 Share Posted October 31, 2009 Mines not going to badly Gary just waiting on a 1 bar spring and an oil change then its off to get the tune tidied up for this new setup Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4910684 Share on other sites More sharing options...
Tangles Posted November 1, 2009 Share Posted November 1, 2009 hitting the dyno again in 2 weeks time to sort out the rpm-/fuel cut. seems to be boost related can see it's losing 15kw at top end, due to the rpm cut should be seeing right on 250rwkw not 235kw Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4911914 Share on other sites More sharing options...
Tangles Posted November 1, 2009 Share Posted November 1, 2009 oopsies ! my 1st ever spin, awd too ! Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4911918 Share on other sites More sharing options...
cactus Posted November 1, 2009 Share Posted November 1, 2009 I have just finished building my new RB30 bottom end, goes in for run in tune next Monday and then will add a heap of boost two weeks after that (assuming I get enough Km's on it). I will definitely post new power + torque with my auto against my old RB25 set up. Will also be interesting to see how my 60ft times work out considering my RB25 wouldnt dip under 2.4 seconds with a 4000rpm stall! Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4912920 Share on other sites More sharing options...
satanic Posted November 1, 2009 Share Posted November 1, 2009 HEY STAN , love the car in the Magazine mate, congrats !!! Cheers mate - I'm very stoked with the way it came out! Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4912927 Share on other sites More sharing options...
chalky Posted November 2, 2009 Share Posted November 2, 2009 R32 RB20DET, roughly 200kw untuned with these mods FMIC, RB25 s2 turbo (10psi), nismo 555c, Z32 AFM, GFB BOV, POD, GREDDY E-MANAGE, NOS Standard auto, 3000rpm stall Missing mainly in 1st &2nd due to untuned 2nd semi slicks (Nos was not used at the time) 12.4 @ 104mph Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4913439 Share on other sites More sharing options...
Dj laBBy Posted November 9, 2009 Share Posted November 9, 2009 Hey guys, yah it is good to see guys out there who like auto's in their skylines.. I love em, although i have gone through a few. As we speak, i have a jatco 3spd, transbraked, manulised, blah blah, everything done.. With a 2800 stally and on semi's i managed 11.5@120mph with 271rwkw with a rb25/30 gt35r apexi powerfc, stock as a rock rb30. I ended up blowing my bottom end and decided to go all out. I have a ported rb26 head going on(just need cam caps if anyone has any) gonna drop a gt45r on, 1000cc injectors, E85 and so on on a forged bottom end. I had to sort some oil issues, (sump capicity, oil pump and head drain and oil cooler) so hopefully this time i will make in excess of 400rwkw. Though i am thinking of dropping the driveline in a holden tonner, just as it will be a weekender. My R31 will become a more of a family car, but using a Re4r03a tricked up box and a basic turbo setup, should last a while.. Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4926978 Share on other sites More sharing options...
Fastrotor Posted November 9, 2009 Share Posted November 9, 2009 Hi mate, thats a great time ! Transbrake and 3ltr torque helps ! What was your 60' time with the transbrake ?? Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4927247 Share on other sites More sharing options...
Dj laBBy Posted November 10, 2009 Share Posted November 10, 2009 Cheers, yah i love 3lt torque!! Though never been in an rb20/25 car, but have heard that it has torque from idle better than the others. 60' 1.788. Not the best launch. It would've been better if i could actually get on boost and better on the converter off the line, but i had to control it as i'd just fry the tyres to the 60' mark with the falken semi's. I really need some big bags with soft sidewalls and large profile to get proper grip. I'd probably get into the high 1.6's if i could and dip into the tens with that setup, too bad now though.. checkout http://www.skylinesaustralia.com/forums/in...p?autocom=times #11. I was 5 at one stage. Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4929160 Share on other sites More sharing options...
Fastrotor Posted November 10, 2009 Share Posted November 10, 2009 Yeah sounds like you need abit bigger (or smaller size in reality!!) converter to make use of the transbrake. I just spoke to Mike at MV today about what im doing etc . He said 450rwkw is right on the edge for the 4 speed jatco..... hmmm .... Also, you can get a transbrake for them, however he buys it in from the states (the valvebody), and its fully manualised, running full line pressure always...(ie really drags only type car use) ... about $7-800 odd....... So that put a stop to that plan......, will just have to sort out weak as piss rear brake problem so i can stall up the old fashion way. He also agreed something sounds wrong with my converter also, as they aim for only about 6-7% slip up top...... i have alot more . So when motor come out, it'll go down. They don't do the converters themselves, they have a contract with a converter shop. not sure which one. Gary Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4929469 Share on other sites More sharing options...
chalky Posted November 11, 2009 Share Posted November 11, 2009 any one got a contact for an auto builder around ballarat vic? Link to comment https://www.sau.com.au/forums/topic/131489-the-automatic-performance-thread/page/13/#findComment-4930374 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now