Jump to content
SAU Community

Meguiars Products..

IMPORTD

By IMPORTD,
in Exterior & Interior Styling

 Share

Recommended Posts

IMPORTD Grand Master

IMPORTD

Posted
Posted

Well I learnt some things through some guys here and the meguiars online forums :ninja:

I just wanted to show off my hard work yesterday :ninja:

Before of the bonnet: (major problem)

P1000766.jpg

P1000768.jpg

After:

P1000788.jpg

P1000787.jpg

Products I used:

NXT Generation Car wash(smells devine for a car wash)

Quik Clay with Quik Detailer (amazing what this baby does)

Scratch X (lots of 'passion' or elbow grease)

Deep Crystal Polish (A must for dark colours :ninja:)

Deep Crystal Carnauba Wax (get to wax entire car, then buff it off :ninja:)

I only washed the care once. Some here like to wash again after they clay but there is no need as the Quik Detailer cleans it :)

6hours of passion later, I'm very impressed.

P1000775.jpg

Link to comment
https://www.sau.com.au/forums/topic/131551-meguiars-products/
Share on other sites
TurboX Mentor

TurboX

Posted
Posted

Almost unbelievable! :P

I thought I would have to get the usual "cut & Polish" to get a result like that!

With the usual burnishes on the black trim and white crap in the edges etc. :(

Will have to give it a go with those products and see for myself.

Muz Experienced

Muz

Posted
Posted
Well I learnt some things through some guys here and the meguiars online forums :O

I just wanted to show off my hard work yesterday :P

Before of the bonnet: (major problem)

P1000766.jpg

P1000768.jpg

After:

P1000788.jpg

P1000787.jpg

Products I used:

NXT Generation Car wash

Quik Clay with Quik Detailer

Scratch X

Deep Crystal Polish (A must for dark colours :()

Deep Crystal Carnauba Wax

6hours of passion later, I'm very impressed.

P1000775.jpg

Exceptional finish! Now where did you say you live again? Just need the address so I can drop my car off and will it be ok to pick it up around 5.30? :O

MANWHOR3 Proficient

MANWHOR3

Posted
Posted

As far as i'm aware, that is incorrect. Scratch x is not an abrasive at all. A cut is the abrasive one.

the scratch x is just a filler - much like a wax of some type to restore optical consistency. Taht is, in simple language, it just attempts to raise the scratch up to the normal height so it isn't visible.

Howie Grand Master

Howie

Posted
Posted

I think you'll find scratch-x is not a filler at all. It is an abrasive... on Meguires own cut rating (from 1-10) it rates about an 8. The only reason I know this is because I talked to the distributor for Meguires in SA about their products when i went to do my windows (see general maintenance thread).

Here's a bit more information about scratch-x.

http://www.guidetodetailing.com/js-article...ighlight=000000

IMPORTD Grand Master

IMPORTD

Posted
  • Author
Posted

I will let you know how long it lasts... My car isn't garaged so its in all the eliments (sp?) 24/7.

I'm just glad its looking nicer and smoother until I get it resprayed. The bonnet was in a terrible condition..

How to remove swirls by hand:

http://meguiarsonline.com/forums/showthrea...p;threadid=7011

Cubes Grand Master

Cubes

Posted
Posted

Whats the best product to remove the swirl marks that can be seen on a in direct sunlight on a dark coloured car that you often see after a respray?

I've used polish that appears to cover it but that soon dissapears.

Its probably not noticable to others, but I see it on certian angles.

IMPORTD Grand Master

IMPORTD

Posted
  • Author
Posted

Ok I had no previous products to use so $160 start up costs which included the lambswool mit ($19.50) and a tyre brush ;) ($8) and polishing cloths($20) so products come to $110.

First I washed the car...

  1. NXT Generation Car wash is great.$20 With the lambswool mit it suds up really well and in the shade you can wash the whole car and then hose off.
  2. I then dryed the car with a chamois.
  3. Quik Clay with the Quik Detailer (comes in a pack) $33 - I only clayed horizontal parts, like the bonnet/roof/top of the panels along the side. Spray the Quik Detailer and rub the clay bar over the section, remembering to work in small sections. Wipe off Detailer with terry towel and kneed the clay bar to a clean surface. Becareful not to clay with a dirty bar, you'll scratch the crap out of your car.
  4. Scratch X was next...$20 This is were you really get tired and start to wonder why you started :wave: I worked in small sections and buffed off with terry towels, I only did problem spots. And no need to let the product dry. (All meguiars products wipe off when wet except for 'Waxes')
  5. Deep Crystal Polish is amazing.$20 This part of the job is where you start to see results in your hard work with the scratch x...It revives dull colour.. And gives depth with a great shine. As always, work in small sections DO NOT ALLOW TO DRY. Wipe off with terry towel or your polish cloths.
  6. Deep Crystal Carnauba Wax $20 Wax the whole car. Allow it to dry then buff off with a clean terry towel or what ever you use. Then go over the car again with another clean cloth.

All Meguiars products wash off in water, so in teh machine went all the rags/foam applicators and then into the dryer so the terry towels are nice and fluffy for the next time :( Store them in a plastic bag to keep them free from dust :O

Munna1 Proficient

Munna1

Posted
Posted
Very nice.. I hope you used a Meguiars Lambswool Mit. Would NEVER go back to a sponge, the mits are so easy to use and foam up really nice.

I want some near origional size pictures of the Stagea and its paint work. :P

Ive tried everything cubes my car is pearl red I just cant get rid of em. The only way to do it is to hide them with polishes but it certainly doesnt last long at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      HY51 Fuga Hybrid

      By MBS206 · Posted

      find it funny everyone claims different fuel chains, do different things with their fuel blah blah blah. We don't have that many fuel terminals in Australia. The fuel tanker trucks drive into the terminal, fill up, and drive directly to the service station and dump out. The majority of fuel you get, is coming out of the same terminals. The variation is actually at the individual service stations and how good their tanks are, as well as how much turn over they actually have. Older fuel stations, that haven't had their tanks replaced are going to end up with the worst fuel. Also a lot of older stations have shit design, and shit maintenance, and end up with more water absorption into the tank. This is when you then get a bad batch of fuel. Other shit things happen, like tanker drivers have a f**k up, and starting to unload the wrong compartment on their truck into the wrong tank. 
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Yeah go with that one 
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      This one?? In other news: I cannot tell the difference between my red MX5 with the silver grey hard top......... and the Ferrari 599XX EVO, they might as well be twins, well.......apart from the big wang hanging off the back of the Ferrari...🤔🤣, without the wing they are identical   
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Turn it into the pride flag 
    • GTSBoy
      RB26 Block Filler rigidity/deflection test

      By GTSBoy · Posted

      I think you'll find we're confused about what you were trying to do and how you were doing it. I would have thought that block rigidity was something you measured while loading the block in beam or in torsion, and that you would do so before and after grout filling, to see if putting material in there created a "composite" construction with the expected rigidity increase. Notwithstanding that the true function of grout is less about gross rigidity than local (ie preventing bore deflection/splitting and tying the bores to the main bearing locations a little better, etc etc). It is nearly impossible to follow your description of what you've done without closing ones eyes and making "aliens" hand shapes in front of oneself to try to follow the manipulations you've made. It's still unclear to me what you were trying to prove.
×
×
  • Create New...