Jump to content
SAU Community

Recommended Posts

Here's a quick rundown of the day:

NismoR34 - R34 GTT with pod, cat back and boost

182.0 rwkw @ 7100 rpm

Jet-33 - R33 GTStApexi S-AFC, Blitz Access ECU, Blitz BOV, 3" zorst, POD, Turbosmart boost controller @ 14psi peak holds 11 psi

179.9 rwkw @ 6900 rpm

RUS - R33 GTSt Mods ???

183.2 rwkw @ 6800 rpm

TUFR33

MUCK

riggaP

Adzmax - R33 GTSt Mods ??

164.9 rwkw @ 6700 rpm

INASNT - 400rwkw Supra, apprently INASNT was 'having us on' and couldn't deliver :D

DJ_L3ThAL - R33 GTSt, SAFCII, Boost, leaking BOV (now fixed), possible faulty coil pack also

162.4 rwkw @ 7000 rpm

Jamezilla

Adz - My old R32, unfortunately he slept in :P

Matty - R32 GTSt, who also 'slept in'

R31Nismoid - Unfortunately when fitting a boost controller I discovered the R31 had a faulty fuel pump which will be replaced shortly.... expect some big numbers soon

Al - R33 GTST, Wolf 3D ECU, 12 psi boost

172.4 rwkw @ 6400 rpm

R32PWR - Mental R32 GTSt RB27 with twin HKS 2835R's, unfortunately during "testing" on the previous thursday night full boost in second managed to snap the RHS axle... But beware....

Ronin 09

RedlineGTR

Meggala - R32 GTST, Pod, Zorst, 14 psi Boost, Dr_Drift ECU

148.0 rwkw @ 6800 rpm

Ben from BMT - 180SX, SR20, Dr_Drift ECU (not tuned yet), 17 psi boost peak holding 12 psi, FMIC, zorst, filter

155.3 rwkw @ 6000 rpm

Mutex - Stock as a Rock R34 GTT

161.1 rwkw @ 7000 rpm

Link to comment
https://www.sau.com.au/forums/topic/13156-dyno-results-29303/
Share on other sites

ooooooo i c.

1fitty! hmmmm.. damn it i want an extra 8rwkw!

can u ask benny it will be for stainless 3" dump and front pipe?

im thinking of not bothering with the cooler just yet and get these bits done first.

Thanks again Doc!

One thing has got me curious though: did the guys keep turning off the TCS after each restart of engine?

TCS always comes back on after ignition / engine shutdown!

Perhaps this explains why increased boost and also using your BV didnt make a difference?

I only turned off TCS the first time...

Originally posted by nismoR34

Thanks again Doc!

One thing has got me curious though: did the guys keep turning off the TCS after each restart of engine?

TCS always comes back on after ignition / engine shutdown!

Perhaps this explains why increased boost and also using your BV didnt make a difference?

I only turned off TCS the first time...

Don't really know actually?? I'm pretty sure they didn't turn it off after restart.... hmmmm that will have to be an experiment for my new dyno??

Sounds like a plan to me :(

What brand dyno is it? Locality [near Essendon or ?]?

I am pretty keen - though I am not expecting to get much more than 182 in current form... I will probably wait until after I have done some mods. Looking at finishing off exhaust soon.

It's a Dyno Logic, I've researched thoroughly and believe this is a much better product, and has many more features than the more common Dyno Dynamics. The new premesis will be in Heidelburg.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...