Jump to content
SAU Community

Advan 17inch Rims And Nismo 18s + Misc

mmarschall
 Share

Recommended Posts

mmarschall Enthusiast

mmarschall

Posted
Posted (edited)

---update----

Advans sold,

Nismo rims sold pending payment. other bits still available, offers considered

---------------

Hi,

Both sets are from R32 GTR's one set is currently on the car (Nismo).

One set of 17 inch ADVAN racing rims in gold. slight marks where the wheel nuts are put in otherwise perfect, as new. Comes with a full set of wheel nuts and very thin spacers that were on the car. Rubber: 2 brand new, 2 roadworthy but used(just put on for the car to pass rego). $1,900 or best offer. I was told they are worth over 2k but havent seen any others for sale so if this is unreasionable please let me know or make an offer, would also consider stock rims + cash.

NISMO 18 inch rims, white, made by rays engineering, genuine 2 party alloys. rubber passed RWC but not by a lot on the fronts. There is some scratches around the edges on all rims but it is not much deeper than the paint so would be cheap to repair if required. need to have wheels on the car so these would be trade for your rims plus cash if someone is interested.

ADVAN's:

post-21158-1156415183.jpgpost-21158-1156415352.jpgpost-21158-1156415430.jpg

NISMO Rims currently on car:

post-21158-1156415512.jpg

I also have:

brake master cylinder brace, anodised blue colour and

set of suspension, 2X vielside evolution height adjustable for the rear and 2X TIEN height adjustable for the front but I removed them from my previous gtr as the front TIEN's need refilling/seal after one started leaking. PM or post here if interested and i will upload pics and details.

contact:

(02)66333131 (martin) or

email: [email protected]

or just PM as i check almost every day.

pick up is prefered (Kyogle, near LISMORE in northern NSW) but i can arrange courier if required.

thanks for looking and please let me know if more info/pics is required.

martin

Edited by mmarschall
slw32 Enthusiast

slw32

Posted
Posted

how much do you want for the nismo wheels? Width and offset please.

iv got a set of 16inch 2 peice wheels from 32 gtr with new tyres that im might trade. or give me a price outright and you can put the other ones on for the moment

mmarschall Enthusiast

mmarschall

Posted
  • Author
Posted

Hi,

Sorry PranK, prices for all:

ADVAN's: $1900

NISMO's: $2500

Suspension: withdrawn from sale until someone can tell me what a reasionable price is or what it would cost to refill the 2 TIEN's?

Master cylinder brace: um, $200? if anyone can send me a link where i can find one for sale so i can beat the price as i have no idea on this one!? (will add a pic soon)

Also have a used brake master cylinder and booster which were from a wrecked GTR32, paid $250 for both, so start with that for a price, happy to seperate, offers considered

NEW Front Bendix Ultimate brake pads bought for a R32 GTR. paid $160. $130 ono (part no: DB1170 ULT)

To answer the questions on the rims size, the ADVAN's have the sticker pictured inside... no other details on them that i can see. The rubber is 235 but when i had it fitted the shop told me the rims are made for 245's (the 235's do stretch a little but are legal). offset? well they fit fine on an R32 gtr! can anyone tell me how to measure that? All 4 seem to be exactly the same size (no visible difference and tape measurements were identical

The NISMO rims have stickers (will post a pic shortly) with 18 X 1.0, of.+20, PCD 114.3 and "RAYS ENGINEERING" on it. Again all rims are the same size as far as i can tell but they do have different tyres front and back (255's on the back that stretch a bit and 225 or 235 (cant remember) on the front that are REALLY stretching to fit...).

thanks,

martin

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' R34 GTT Series 2

      By hoodedreeper · Posted

      Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • MBS206
      Rb26/30 build

      By MBS206 · Posted

      And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • MBS206
      Nismo rear spats

      By MBS206 · Posted

      No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Butters
      Rb26/30 build

      By Butters · Posted

      Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
    • GTSBoy
      Rb26/30 build

      By GTSBoy · Posted

      2630s work perfectly well. There is something to be said for just using the 30 head, as it saves all the pain of the conversion, still makes tons of power, still sounds cool, etc etc. 2630 will obviously make more power again, but the differences are not stupidly big. It really depends on whether you're racing for sheep stations or not. If it's dead serious, then it's a 26 head. If it's just for fun, it could go either way. But the 26 head and the effort to get it set up, etc etc, is part of the fun.
×
×
  • Create New...