Jump to content
SAU Community

Recommended Posts

I just got my car back from the panelbeater.

A few things seemed very funny about the car.

1st thing is that my max speed on the car now is only 80kn/h.

It revs below 4,000 rpm just to go from 0-60

It revs pretty high just for it to go 20km/h.

It feels like its not even using the turbo itself. I'll leave the turbo for now.

The car feels like its only using 2 cylinders.

Panelbeater told me that he sprayed the whole engine bay with water. I noticed to when I checked the engine bay, my fuse box cover wasnt even on, everything was wet.

He told me just to let it dry and see how it goes tomorrow. He said that the sparkplugs might just be the problem... just wait for them to dry.

Hopefully this will solve my problem.

Does anyone agree with me on the sparkplugs?

Can they just dry up and be fine again? What about the fuse box?

Link to comment
https://www.sau.com.au/forums/topic/131619-car-struggles-to-go-60kmh/
Share on other sites

if it sounds like a volkswagon then yeah more then likely yu have moisture in the plugs/connections..

disconnect everything and spray it out with contact cleaner/crc/wd40 and then just leave it out in the sun for an hour... plug everything back up and see if it runs then.

if not i'd be taking it straight back to the panel beater and making it their problem!

Water in spark plugs = rusted = shithouse performance. Most likely you'll need to replace them.

The guy is an idiot for hosing down your engine. It will need to dry out, check all your electrical connections, WD40 is a water dispersant and will help.

Take the plugs out and blow them dry with an air compressor. Check the coils as well.. Make sure your coil cover is tightly fitted for next time and when YOU wash it next, don't just get a hose and spray. Be careful.

And yeah, if it's just the plugs, you will know about it. If the engine sounds pretty normal.. then that's something else.

Edited by aDrew_C
I just got my car back from the panelbeater.

A few things seemed very funny about the car.

1st thing is that my max speed on the car now is only 80kn/h.

It revs below 4,000 rpm just to go from 0-60

It revs pretty high just for it to go 20km/h.

It feels like its not even using the turbo itself. I'll leave the turbo for now.

The car feels like its only using 2 cylinders.

Panelbeater told me that he sprayed the whole engine bay with water. I noticed to when I checked the engine bay, my fuse box cover wasnt even on, everything was wet.

He told me just to let it dry and see how it goes tomorrow. He said that the sparkplugs might just be the problem... just wait for them to dry.

Hopefully this will solve my problem.

Does anyone agree with me on the sparkplugs?

Can they just dry up and be fine again? What about the fuse box?

Is it a manual or auto.

If its an auto. then you transmission is stuffed.

I though the plugs etc would make the think kick like a mule when your taking off.Is this happening?

If its revving to 4000 and not moving your transmission is stuffed.

Hope i have been of some help.

:)

I went crazy with dielectric grease when I dropped the injectors in as I noticed a few plugs had signs of corrosion.

24006ba8.JPG

Should prevent furthur incidents when hosing down your engine bay. Its also good for battery terminals.

I always spray down the engine bay every 3months or so. Never had an issue.

sounds like the panel beater had abit of fun in your car bro he blew your turbo then hosed your engine bay so he can blame it on that lol... nah just joking mate i dont realy have anything to add everythings been said so good luck

silly question are all intercooler hoses conn?

check and see that ur crank angle sensor is pluged in properly check all conn ive washed my engine bay heaps of times and never had a prob also u got a boost guage see if its makin boost maybe ur turbo is shagged or id panel beater has d/c anything in the engine bay go over it to make sure it all pluged where it should be ul prob find its just somthin minor

abit of advice i was once given and live by it now wen tryin to find a fault allways look for the simplest things 1st

Edited by japwpn

Spark plugs are probably having a nice spa right now.

Take it back to the di(khead panel beater and get him to fix it. (then try a bit of panel re-arrangement on his stupid skull!).

Oh, and don't let him near your car next time.

The worst thing you can do is hose/degrease/clean your engine and engine bay and then let it sit. If you ever do this start the car up and warm it up/dry it out straight away.

A clean engine is an alter to work [or pray] on!!

Damn I cant try out if the car is working fine or not.

Dead battery and its raining.

Is it possible to just try and figure it out by free revving the car?

1st of all Ive got to get it started. Don't want to jumpstart it in the rain.

Thats just asking for it

Edited by aquariuz6
Damn I cant try out if the car is working fine or not.

Dead battery and its raining.

Is it possible to just try and figure it out by free revving the car?

1st of all Ive got to get it started. Don't want to jumpstart it in the rain.

Thats just asking for it

Call the panel beater,

Tell him the situation.

Ask him if he is going to fix the problem.

If he does not want to.

Then get a mechanic out to fix your problem.

Then pay for it .

Take the bill to the panel beater and get him to re-inburse your money.

Give him the bill to use on his tax return.

If he does not want to gie you the money then tell him you are going to small claims.

Why are you taking the responsibility on your shoulders bro.?

Oh just let him know when you call him what you are intending to do.

If he does nothing about it. Get a small claim tribunals report and state what had happend .

Then call him again to say you are lodging the thing.

He will see your way by then.

Just letting you know how to go about it.

CALL HIM.

TALK TO HIM ABOUT IT.

IF HE IS GOOD HE WILL FIX IT.

IF HE IS BAD HE WILL STILL HAVE TO FIX IT(Unless he changes his name)

I hope you get my drift.

Cheers

Tekin :):)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
    • Was that Australia Delivered Duncan? Does it have siren etc?   I used to have remote start on an old 32 two decades ago, it was a cool feature. I used to wake up early in winter for work. Start it and by the time i was out the door a few minutes later the engine was warmed up and the heaters had the car toasty. It was great.    I don’t mine the ambience lighting.  I drive a western star and it has footwell lights and ambient lighting and it’s great! From the pics of seen of them installed in a skyline I think it’s a nice touch 
×
×
  • Create New...