Jump to content
SAU Community

Recommended Posts

Hey peeps

I was curious if there is a quick fix for my problem.

When i get to full boost (18-20psi) and change hard from 2nd to 3rd and the gate goes to close then re-open it stutters, its like a mis-fire... Sometimes it wont do it if im abit easier on the change or it will never do it if im not on full throttle when i change.

It goes full throttle, change, power on, stutter, power on as normal till redline in 3rd.

Any ideas??

Never does this from 1st to 2nd, and it hasn't from 4th to 5th either.

Ne replys would be cool!

Thanks all

Link to comment
https://www.sau.com.au/forums/topic/131713-misfire/
Share on other sites

Well that makes two of us who'd like some help hehe :)

Mine never did it on stock turbo, i think it cud have somethin to do with the external gate... im not quiet sure!!

There must be a pressure build up ,changing the gears has nothing to do with it. Taking your foot off the pedal quickly at high boost levels has.

Do you both run front pipes and pods?

I believe they are to small for the turbo's and the boost levels you are running.

The air is sucked in at maximum boost and then shut out,

If your pipes are not large enough a vacuum can form which tries to spin the turbo's the other way,once they try to spool again.

This would happen if you are using standard air boxes and larger turbo's with higher boost.

The other problem can be in your blow off valve and how effective it is. If you have one that is?

These help the turbo's release unwanted air through a wastegate at gear changes or really

between gas pedal intervals.How well have you installed these? If you have none then pressure builds up and a vacuum once again might form especially at high boost levels.

Last but not least you have timing problems,answer is easy to that one, get a tune.

I hope i have helped in some way.

Cheers

Tekin

Link to comment
https://www.sau.com.au/forums/topic/131713-misfire/#findComment-2440517
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
    • Was that Australia Delivered Duncan? Does it have siren etc?   I used to have remote start on an old 32 two decades ago, it was a cool feature. I used to wake up early in winter for work. Start it and by the time i was out the door a few minutes later the engine was warmed up and the heaters had the car toasty. It was great.    I don’t mine the ambience lighting.  I drive a western star and it has footwell lights and ambient lighting and it’s great! From the pics of seen of them installed in a skyline I think it’s a nice touch 
×
×
  • Create New...