Jump to content
SAU Community

Sad, Sad Day For Me.....

SABBAi

By SABBAi,
in Victoria

 Share

Recommended Posts

SABBAi Grand Master

SABBAi

Posted
Posted

Well, tonight after work there was a little incident....

The person in front slammed on the brakes, as did I. So much so that ABS went spako. I had stopped with about 1/2 a cars length from the car infront. Then I look in the rear vision mirror, and this car hasn't stopped at all.

BANG. 60kmh into the back end. My poor old car is not in a good way. Both rear gaurds have folds in them, the rear bumper is shattered, the spare wheel well is creased, and the rear seats have popped forward in the middle.

To make matters worse, a third car hit the guy behind me. YAY!! 2 wiplashings! I tried to move my poor old girl off the road but the rear gaurds have pinched both rear tyres.

I'm ok physically, but will probably have a very stiff and sore neck and back tomorrow. But as for my car, she's not in a good way. I get to see her once more on Monday before they assess and write her off. Man, the amount of time and effort that went into builder her......

The events, the fun, the enjoyment, it's like loosing a trustworthy old friend. Rest in Peace girl.

Just some pics to remember you with.

img63762jm.jpg

picture200060qj.jpg

img63597tu.jpg

Just a quick pic of the damage.....

image043kk0.jpg

Link to comment
https://www.sau.com.au/forums/topic/131737-sad-sad-day-for-me/
Share on other sites
eMsta Grand Master

eMsta

Posted
Posted

damn man - atleast u alright

Once they assess it, and once you know how much insurance will give you - you can look for your new mistress - but by the looks of things, working so hard to get your car right....it will take more than just another car to fill the void...

SABBAi Grand Master

SABBAi

Posted
  • Author
Posted

THanks guys. Time will tell what happens next. The guy was insured who ran into me, and he was at fault, as I was stopped. Felt sorry for him, he had just changed jobs and had close to 50 mins to get to work.

arep3 Experienced

arep3

Posted
Posted

damn man that sucks.... hope u dont have too many probs with ur back/neck. maybe get urself checked out by a doc or physio. u dont wanna end up with my back probs

cars are replacable. just as long as ur alright!

Starionturbo Mentor

Starionturbo

Posted
Posted

Sorry to hear man!

Good to see that you understand the other blokes situation, any of us can have accidents.

I once tapped and scraped a motorbikes muffler when i was driving my starion about 5 years ago and the biker was good enough to say dont worry about it mate I shouldnt have stopped when I did.

Kaz200 Grand Master

Kaz200

Posted
Posted

West & Interloper: they can hit the brakes in the middle of the freeway at 100k/hr for no reason and if you run into them it's still your fault. Rear ending is always the fault of the driver behind because you're supposed to be watching for brakelights blah blah and if you don't have enough time to stop then supposedly you didn't leave enough room.

Which is why I really cant understand why so many ppl tailgate in VIC??

Personally I can't even see the car that's 2 ahead in the 180 caus its so low... if there's a late braking dick in front of me and he slams on the brakes I'll be in trouble.. so I always leave so much room in front of me people think it's an invitation.

Anyway so sorry to hear about that Scott.. there was so much work/love in that car.. hopefully you'll get a decent payout at least.

I totally have neck empathy after straining mine this week.. been 5 days of pain so far. I hope you are going to see a physio.. you don't want more problems later on and if you do have any.. at least you will be covered by insurance caus you saw a doc after the accident.

Take it easy

700HP-GTR33 Mentor

700HP-GTR33

Posted
Posted
West & Interloper: they can hit the brakes in the middle of the freeway at 100k/hr for no reason and if you run into them it's still your fault. Rear ending is always the fault of the driver behind because you're supposed to be watching for brakelights blah blah and if you don't have enough time to stop then supposedly you didn't leave enough room.

Which is why I really cant understand why so many ppl tailgate in VIC??

Personally I can't even see the car that's 2 ahead in the 180 caus its so low... if there's a late braking dick in front of me and he slams on the brakes I'll be in trouble.. so I always leave so much room in front of me people think it's an invitation.

Anyway so sorry to hear about that Scott.. there was so much work/love in that car.. hopefully you'll get a decent payout at least.

I totally have neck empathy after straining mine this week.. been 5 days of pain so far. I hope you are going to see a physio.. you don't want more problems later on and if you do have any.. at least you will be covered by insurance caus you saw a doc after the accident.

Take it easy

So says the O mighty son of rajab.......make sure you leave enough stopping distance...don't tail gate.

I have seen many cars go into the grass divide on western -ring road ...stupid tail-gaters.

At least you could stop.......and you are telling the story. :(:) .In this case....I would suggest a transplant .

Get a Laser and bolt up your motor into it...does it fit?What cars can you bolt that motor into anyway?

Nahhhh...buy it back offf the insurance company , then get it fixed.Looks too goodto through out.

Anarkei Enthusiast

Anarkei

Posted
Posted

judging from the pics of the damage the guy wasn't paying attention to what was happening infront and hit the brakes at the last second. i had a similar thing happen to me a little while ago.

sorry about the car, it's a nice looking little beasty.

hey you never know, might get lucky and the damage will be repairable...

Roy Grand Master

Roy

Posted
Posted

Aw Man! The TX5 passing is a sad day. The Giant Killer was cool, as it was different and it always had cool custom tweaks in the works.

...SUX, but i hated mt R31 GTSX being written off, but really the move to the R32 was for the best...so every cloud has silver lining. SR20 coming your way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...