Jump to content
SAU Community

New Vq35hr And Vq25hr Engines For V36

Rezz

By Rezz,
in General Automotive Discussion

 Share

Recommended Posts

Rezz Grand Master

Rezz

Posted
Posted

It's been a long time since I've posted new items, and if it's a repost, well it probably won't be the last time...

New VQ engines for upcoming Skylines.

The current VQ series engines have been reviewed and updated in time for the upcoming launch this northern Autumn. The names 'VQ35HR' and 'VQ25HR' mean High Revolution/High Response due to the refined and revable nature of the new engines. A max rev ceiling of 7,500rpm for the HR series engines should put to rest the complaints some had about the previous generation VQ, aswell as greater power and a sweeter engine note.

With the new engine development, it started with the update of each main part based on the current VQ. 80% of the engine has been changed, and the remaining 20% are parts not related to engine performance such as the bolt/nuts and seals etc. The V6 configuration is the same as is the bore and stroke, hence keeping the 'VQ' designation.

Power wasn't the only thing that was pursued but also the sound, Nissan wanted a pleasant acceleration soundtrack to compliment the superior refinement offered by the V6. Alot of testing was done to eliminate unwanted noise while efforts were made to improve the 'sports note' of the engine by means of exhaust optimization of the twin mufflers, the tuned length exhaust manifolds and also the exhaust catalysts etc.

As for the engine induction, a symmetric twin throttle body induction system and straight suction ports are adopted to obtain class-leading maximum power, and intake resistance has been decreased by 18%. In addition, CVTC (Continuously Variable valve Timing Control) is installed controlling the camshafts, the setting of the valve timing with a high degree of adjustability is possible, and the combustion efficiency of the whole intake system has been improved from low in the rev range to high. On the exhaust side is an electromagnetic type CVTC, and on the induction side is an oil pressure type. The overall improvement in torque through the rev range is welcomed by use of CVTC, though the main reason CVTC is installed on the exhaust side is to control EGR (self-EGR). The engine block was not only refined for vibration and harshness, but also improvements in oil circulation (enlarged sump) and cooling.

In a big step to decrease friction, the Conrods are lengthened giving a reduced angle of upwards/downwards force in relation to the piston so that piston friction is reduced along the cylinder wall during full crank rotation, therefore the height of the deck of the cylinder head has had been increased. As well as reducing friction for the main movement parts, the piston rings and crank surfaces also were given attention. Also in a world first for use on a domestic engine, the valve lifters are coated in a 'diamond like carbon coating' so that friction decreased by 40%.

post-4816-1156514051.jpg post-4816-1156514091.jpg post-4816-1156514128.jpg post-4816-1156514138.jpg post-4816-1156514177.jpg post-4816-1156514191.jpg post-4816-1156514201.jpg

Duncan Grand Master

Duncan

Posted
Posted

actually, re-engineering a motor after 3 years sounds to me like an admission that it was under-engineered and developed in the first place :rolleyes:

Good to hear that the engineers have had a win over the renault accountants.

Rezz Grand Master

Rezz

Posted
  • Author
Posted
Doesn't mention if its a direct injection engine or not?

Nothing in that article I translated mentioned direct injection which went into a bit of detail regarding the new features, so I guess the HR engines don't have it... although the previous VQ25DD and 30DD engines did.

scathing Grand Master

scathing

Posted
Posted
actually, re-engineering a motor after 3 years sounds to me like an admission that it was under-engineered and developed in the first place :)

How many revisions did the various RB versions get over its 15+ year life?

The VQ35DE has been around for quite some time, and appeared in Wards' list of Top 10 Engines of the Year (in its class) for the past decade. Its just not ever been put into a sports car before.

I'd agree that it wasn't engineered for a sports car application in the first place (too much low end, not enough top end, and weak internals) but the fact that they're revising it doesn't indicate an inherent problem with the VQ design.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R33 fuel setup

      By r32-25t · Posted

      I used the radium thing, makes the whole parallel assembly a lot more compact compared to any other way of doing it 
    • TurboTapin
      R33 fuel setup

      By TurboTapin · Posted

      Racetronix also sells those ethanol content sensor bypass blocks. Adapter, Flex-Fuel E85 Sensor High-Flow Bypass, In-line No Sensor (ADF-FLEX-NS): Adapters - Flex Fuel | Racetronix Ethanol content sensor are originally designed to be on the feed line. These bypass blocks are meant to be ran in the feed line and not return. The continental ethanol content sensors have a 3/8" ID and not 5/16". This is why they are ran on the return line directly in conjunction with a low threshold sampling value VS in the feed with one of these blocks.    Haha we think alike, I used both original feed/return for 8AN feed, and one of the Hicas lines as a 6AN return. I also capped off and left the other Hicas line as a spare. 
    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
×
×
  • Create New...