Jump to content
SAU Community

Late S2 33 Engine Electricals .

discopotato03

By discopotato03,
in Engines & Forced Induction

 Share

Recommended Posts

discopotato03 Grand Master

discopotato03

Posted
Posted

Hi all , been looking at S2 33's and it seems 98 models get what looks like a Neo style CAS . Does anyone know if this is the only difference compared to 96-97 models engine electrics/ECU wise ? Can I assume the 98's would also have the R34 Neo type inlet cam CAS drive .

Thanks , cheers A .

Link to comment
https://www.sau.com.au/forums/topic/131811-late-s2-33-engine-electricals/
Share on other sites
discopotato03 Grand Master

discopotato03

Posted
  • Author
Posted

Yes in the engine pic . Can anyone confirm if its an R34 type CAS and uses the 34 drive which I thought was different to R33 S1 , S2 96-97 . I need to know because there may be differences in plugs and the ECU signal . Want to find out for PFC compatibility and for cam upgrade path .

Cheers A .

r33_racer Grand Master

r33_racer

Posted
Posted (edited)

I have a 96 and 97 r33 s2 and that cas is different, and being a 98 model i would say there is a very strong chance that it is the neo version. Ofcourse thats only from visual appearance.

Edited by r33_racer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
    • Dose Pipe Sutututu
      Help Understand GTT Boost Setup

      By Dose Pipe Sutututu · Posted

      Don't do what I did, use a 300000km old housing with billet gears. The old pump probably was clearanced with saw dust, Edward Lee's special engine treatment sauce and a good odo wind back. I had oil pressure issues, then replaces pump with new housing, new billet gears and 2x track day later binned a motor due to other oil related issues due to a previous engine builder. Long story short, buy a M2 or 3 or 4 N55/S55/S58 and enjoy life.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Yeah. "New pump" does not have to mean "massive pump".
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more.   Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
×
×
  • Create New...