Fitted A Dump Pipe, Now A Funny Fart Noise

[WogsRus]

HI ALL

Well i finally got arround to fitting my FLYEN dump pipe, the bellmouth one. I have new gasket on the turbo to dump, but old ones on the cat.

Now for two days it was fine, but now, when you start it, it almost sounds like there is an exhaust leak somwhere, but inside the pipe, does it when warm too.

I have gone through all the bolts, all nice and tight, cheacked for leaks, can't feel anything, anywere. turbo, cat, manifold, all good.

The car still pulls like it did, no loss of power or anything.

You can't seam to hear it directy outside but more inside, like inside the pipe. I am thinking that now that the O2 sensor is more in the flow of the turbo, maybe that is making the sound.

I am going to get new gaskets for the cat, and put them in, just to make sure. But has anyone else had a simmilar problem to this?

ANYONE?

[WogsRus]

bump. ANYONE?

[WogsRus]

no one is reading this post, humm ok fine

[RCEBNR]

did u use any high temp sealant b/w the gaskets and the dump?

[WogsRus]

nope no high temp sealer between the dump and the turbo, no need, i got a genuine copper gasket, and was told not to use any, nobody i know has, and it is definatly not leaking from there, tripple checked now.

I got new gaskets for the cat, as they are the ones i have not changed, so i will replace these tommorrow night and see where from there.

It is like a leaking noise, but it is inside the pipe. BUT i do not notice any performance loss at all.

ANy other ideas?

[charlieR34]

should post this under force induction... you may find a better result there.

[WogsRus]

can i simply repost in that section?