Jump to content
SAU Community

Recommended Posts

post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :P . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :D

Edited by Yawn
what injectors you running?

Im running nismo 600cc ones.

3lit3 32, from what i know i should be able to easily get 500+ hp atw but i dunno about 700 heh. Yea I know im not even close to pushing the turbos but as i said, im trying to take it on the safe side for now as i do some track work. Once i get a full engine rebuild ill go all out >_< . The dyno run was on 2 wheels.

Cheers

post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :D . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers >_<

Nice, what boost are you running? Looks around 20psi?

seems quite laggy to me. 1 bar at around 4500rpm. nice power though, but they must be fairly large low mouts as the resposnse does not look that great.

yeahh from what i know, the -5 model is slightly bigger than the -7 model, which (i think) is comparable to hks 2530s. Yeah it is rather laggy but im still running a catback so im hoping the graph shifts to the left a bit once ive got front pipes/dump pipes in.

yeah West im running slightly under 20 psi. Btw how do you know its in 5th gear? :P They are bigger than both the gt-ss and the N1s

Cheers

Edited by Yawn
yeahh from what i know, the -5 model is slightly bigger than the -7 model, which (i think) is comparable to hks 2530s. Yeah it is rather laggy but im still running a catback so im hoping the graph shifts to the left a bit once ive got front pipes/dump pipes in.

yeah West im running slightly under 20 psi. Btw how do you know its in 5th gear? :( They are bigger than both the gt-ss and the N1s

Cheers

I was only guessing :bunny: mate.

Damn, those things are bigger than Gt-ss, mad fun their. May i ask what condition is your engine in? Did you do a low boost run? Say around 14psi?

west mate, it would not be in 5th gear. most DD dynos are rated to 200km/h only. It would be either 3rd or most likely 4th gear. Even if it was in 5th (which i can promise it wasn't) it shouldn't make much difference at all. if anything it may build a little earlier as the engine is under more load.

west mate, it would not be in 5th gear. most DD dynos are rated to 200km/h only. It would be either 3rd or most likely 4th gear. Even if it was in 5th (which i can promise it wasn't) it shouldn't make much difference at all. if anything it may build a little earlier as the engine is under more load.

Thank you very much, i dont know much about Dyno thing.

post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done ;) . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :P

Mind if i ask who or which work shop that did the tune?

Are you still running standard injectors? If so whats the percentage shown at 300kw?

D-Jetro is still very new to VIC tuning scene i think though i'd love to have it, just to get rid of the air flow meters.

Mind if i ask who or which work shop that did the tune?

Are you still running standard injectors? If so whats the percentage shown at 300kw?

D-Jetro is still very new to VIC tuning scene i think though i'd love to have it, just to get rid of the air flow meters.

Airlfow meters is what makes the PFC so powerful. D-Jetro I assume was made for the american market as they had no idea how to tune a MAF based system. If you want to go MAFLESS get an Autronic because the time/cost taken to wiring in and tune will probably about the same to plugin and tune a D-jetro and at the end of the day the autronic is better.

On a more advanced engine e.g Fully rebuilt , cams/head work and tune the lagg can be taken care of through playing with cam timing , while still not loosing any of the mid range top end punch these puppies deliver.Just take it to a tuner who knows the fine tuning insides and outs of the RB26 and you will be very rewarded.Should be able to see full boost 22 -24 psi at 4500 rpm or just under but they will start pulling hard much lower than this so are still a very streetable turbo set up.

Alot of the gtr forums I visit from around the world rate these huffers above 2530s for there response and big delivery of power in the top end.

On a fairly stock engine Id put a gtss or the 2860R -7 turbo upgrade ahead of these unless of course you are taking it further down the track,these are purfect for a hard tuned street machine.

On a fully worked engine these turbs are good for 380 - 410 awkws

Just my opinion though. :)

Edited by DVSGOD

one questions I have always wondered is assimung ur've upgraded your turbo, AFM, injectors, fuel pump PFC blah blah and your making a good 300+rwkw...at what point do u need to consider internal upgrades or is this dependant on how hard you drive it? In a street app where you may only trash it occasionally...I'm wondering how the internals hold up over a 1-2 year peroid..on say 1bar or just a little over.

Just intrested as I have a RB25 with the same mods and similar output as this dyno i.e. about 300rwk on 1bar and all the goodies...now I'm wondering how long the engine will last hehe.

post-20525-1156836511.jpg

Hey guys just got some new turbos fitted to my car and i thought id post the dyno graph up to see what u guys think. Running sort of a light tune to keep my engine alive during track days until i can afford to get a rebuild done :( . Its using a djetro pfc and still on a cat back. Plan to get a turbo back soon to try and get it to be more responsive. Any comments welcome. Cheers :P

I got an r 33 GTR with a built motor and same turbos and im pushing 366 kw at all fours on 22 psi and pump fuel. My car makes 308 kw at 5600 rpm id post the dyno sheet but dont know how

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh and my rear arms may need some attention too.    
    • Bushings are almost done. Check the date stamp 馃槀 these are likely the original bushings with 27 years and 243ks on them.     Was too dark to get a pic of the worst one.
    • Porous blocks are a known issue on something like a Porsche M96, it's not really something I've ever heard of on an RB26. It's possible what people thought was a "porous block" was really a cracked block that they just didn't spot the crack on.
    • This is a controversial subject really, the whole power vs fun thing I mean And this is the main reason I got back into a MX5 Of the last few notable daily cars I've owned whilst I have frequented SAU R33 GTS-t: fun, but because I'm a idiot I modified well past a reliable fun car and ended up hating it, although that was my fault because I tried to have a daily cruiser and race car all in one, the family called it the sometimes car, because sometimes it was working, sometimes it was broken, gladly sold it NB MX5: brilliant car, thrashed the Bejebus out of it, but, again, was stupid and deleted the air con, power steering and stripped the interior out, whilst still fun, and reliable, and super cheap on consumables, it was not a fun place to be going on long cruises, I did love it, but basically every family member hated going anywhere in it, sadly sold it 2015 WRX STI: soulless thing that looked like your average Kia sedan and had that horrible boxer engine with glass ringlands, the family did like it though, that thing was one of my stupidest purchases and I still regret it 2017 Toyota 86: 馃槳 if I didn't crash it, I would probably still have it, it was a fun little thing, even with that horrible boxer engine, the family did like it, the only reason I didn't get another 86, or, BRZ was the boxer engine, I should have learnt after owning the STI, but I'm a idiot VX SS: great cruiser, fits the whole family, and was fast as.....in a straight line, but a big fat thing, so no enjoyment throwing it around corners, the family was unimpressed with the whole boganness of if, but they did admit it was a comfy place to sit on long cruises As for the NC, I feel it is perfect for what I want, or need out of of a car, whether I'm cruising the Hwy, back roads, twisties or peak hour traffic, the Mrs doesn't mind driving it either, or cruising in it as well, although she does bump her head of the roof nearly every time she gets in, which is farking hilarious, and the kids love taking it for a thrash as well So basically, I've had constantly more fun, and way less headache and heartache, both on the track and on the street, in low powered cars,  go figure.....LOL One thing though, the Mrs has stated that the cams have made the exhaust sound much louder, which they have, but it doesn't bother me, in fact, I actually like it, but, to negate any future comments from the Minister for War and Finances I may look at some changes to the rear muffler set-up to drop the volume down a tad to appease her when we are out and about in it
    • You will need to extend the turbo inlet pipe somehow, which could/might be done with silicone/rubber pipe, but might need steelwork, depending on your intake. And you will need to change the pipework on the outlet in teh same way, but this is more likely to need steelwork.
  • Create New...