Jump to content
SAU Community

Recommended Posts

Hi all, just got myself my 3rd piece of rice gear, some gauges, boost, oil temp and oil pressure. I was told it lights up seven different colors!!!!!!!! WOW

Any who, don't have a clue how to connec them up. I think I know how to connect the boost gauge but don't know how to connect up the oil pressure and oil temperature gauges. I think they are electrical gauges beacuse the only thigns coming out of their asses are wires.

I'll try to get some picture up for all to see and hopefully someone will know what to do.

Did I mention, IT HAS SEVEN DIFFERENCE COLORS!!!!!!!!!!!!!!

James

umm dont u jus put the sandwhich plate on and then hook up the oil/temp sensors into it and for the boost u jus t peice it into the fuel pressure regulator vaccum line that goes into the plenum? and electronics u jus wire it up as usual (+tive and ground)

correct if im wrong

Best place for the internal illumination on them (after you've plugged the important widgets in that actually do shit) I found easiest was too run wires off the 'dimmer' switch, which your imported vehicle should have after it was complied.

Personally I dont like the bright pretty gauges, theyre distracting more than anything and I'm kind of stupid as it is...

I found easiest was too run wires off the 'dimmer' switch, which your imported vehicle should have after it was complied.

i've owned 2 imports, neither had dimmer switches.

and been in about 6 others, none of which had dimmer switches either.

Edited by mad082

best place to wire to is the cigarette lighter.

Its easy to get too, you probably dont use it much, and it has everything you need: earth (negative), positive and illumination wires.

I dont know why people always say to hook boost guages up to the fuel pressure regulator vacuum line, the easiest is to just hook it up to where the stock guage gets its reading from.

There is a small rubber hose in the top drivers side corner of the engine bay that goes from a little box on the firewall to the back of the plenum chamber, just bung it in there.

Oh and with the dimmer switch thing, they are ment to be installed for compliance, Ive got one but the wiring has never been hooked up. Dodgy as.

ok ciggy lighter seems to be a good idea here.....its just that ther's a small button on the gauges for change of color but I don't know if thats also an on/off switch or not. I'll give the ciggy lighter a try first nonetheless

Edited by lingeringsoul

Another vote for ciggy lighter, thats where my stereo's dimmer/illumination is and my dodgy DEFI rip off boost guage is hooked up to ;). Except i removed the ciggy lighter and replaced it with my boost guage, so very easy to connect up. Either splice into the ciggy wires or use spade connectors on your guages and replace the ciggy connectors if you dont use it much. Positive, ground and illumination to come on with your lights, and do as xRHETTx says, but make sure you have a small diameter T piece as the tubing is very thin.

BTW a multimeter/cable ties/electrical tape :P is your friend here

cheers

Evil

Edited by EvilINGT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...