Jump to content
SAU Community

Recommended Posts

hes well looked after he got satin sheets and all the works :/:(

And i whipped his ass and he had to do the food shop on his own..so we all know who is in charge in this relationship

Edited by Wildcat
Hey Wildcat, hyperdrive found that my rear wipers motor for the water spray is the wrong one :/ (it wasn't working, and still isn't :huh:)I have no idea why there is a wrong motor in there.

When my S1 arrived the rear washer did not work. The fronts were fine and the same pump is used for both.

The line to the rear wasblocked. You can get to it by removing the rear cover and the rubber gromets in the body and the tailgate. Disconnect the line and pump through and clean nozzle.

If that doesn't clear it and the pump motor works it would have to be the solenoid that opens the pathway for the water, or the line is blocked closer to the pump I have not got a clue where the solenoid is at the moment, but will search if you need more info.

Cheers 66yo. :):nuke:

I think I have stuffed up.lol

I checked again and it seems like there are two motor sounds when both washers are on together. Check and listen. Ifyou can hear the motor work when it should the it could be a blockage at the rear nozzle.

Its quite easy to get to the line via the cover and grommets in the back .

Cheers 66yo :nuke::/

:huh::)

Hey Wildcat, hyperdrive found that my rear wipers motor for the water spray is the wrong one :) (it wasn't working, and still isn't :huh:)I have no idea why there is a wrong motor in there.

Well im lucky enough that the water spray still works and comes out like its suppose to...the wiper just doesnt move...will have a closer look tonight or tomorrow when it eventually stops pissin down with rain :nuke:

Well im lucky enough that the water spray still works and comes out like its suppose to...the wiper just doesnt move...will have a closer look tonight or tomorrow when it eventually stops pissin down with rain :mad:

The PDWR got me. Its pissing pickhandles here and we love it. Costs $120 for a load of water. :rant::O

oh mister tangles :D i have faith..i just like to be independent and being a girl and all i would like to be able to do things that men think only they can do :mad: but of course hubby can look at it and fix it and i can watch ;):(

You like to watch....................... eh :huh:

hes well looked after he got satin sheets and all the works :mad::P

And i whipped his ass and he had to do the food shop on his own..so we all know who is in charge in this relationship

OUCH!!!!!!! Damn you ARE WHIPPED Mr GTST!!!!!!!!

While we are talking rear wipers...

post-8679-1157105975.jpg

Take a look at the length of mine! I have the fuse removed so it can't be turned on, if it is it just tries to smash the squirter nozzle off tailgate, pretty funny but a little scary at the same time. The wiper arm has Toyota stamped into it so it's wrong in more ways than one!

Anyone have a spare rear wiper arm? Or one they would be happy to part with? I will post a WTB in the trade section but will not be holding my breath...

Cheers

Luke

Far out Munch, thats a bit big... although I have to agree with who ever put it on... piddly little wiper on the back :P

66yo I think the problem is with the motor that runs the water, its the wrong one, The back wiper works and the fronts work with the washers.

Far out Munch, thats a bit big... although I have to agree with who ever put it on... piddly little wiper on the back :P

66yo I think the problem is with the motor that runs the water, its the wrong one, The back wiper works and the fronts work with the washers.

I'mTOTALLY confused.

Is it correct to say (1) The front wipers and washers work

(2) The rear wiper works but the washer does not

(3) The rear washer works but the wiper does not

(4) Nothin' f**kin' works?

(5) Caus its pissin pick handles and I forgot to change the HW from solar to electric

we have all had to have cold showers and its buggered my night life.

(6) And if thats not enough the boys and I, successfully fitted a new water pump and

timing belt into a 180.

(7) God is good to NISSAN drivers.

Cheers 66yo. :D:D

how can the rear window washer motor be wrong? surely any washer motor will work with the 2 wires connected. i got both washer motors sitting in my garage doing nuthin (cant fit washer bottle with cooler piping), but i might need them later on. how about buy a new one stagea girl from nissan? they wont be much $$$ i'd imagine.

Yes it was a very easy job...(for the hubby) :laugh:

Was just a matter of pulling the cap off the wiper arm and tightening the nut... :laugh:

Little embarrasing after all that worrying to find that it was about a 5minute fix job..but at least now i have a working WINDOW WIPER :laugh:

:laugh::laugh: for everyones help and advice much appreciated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...