Jump to content
SAU Community

Recommended Posts

The exhaust temp light on my gtr has been flashing sometimes for a little while now, usually when going up hills under load.

But on the way home tonight the exhaust temp light was flashing even under really light throttle between 2-3000 rpm and also a tick happens which sounds like something in the rocker gear but only ticks when the light is flashing.

Its got me stumped and pretty worried. If anyone could help that would be great.

Link to comment
https://www.sau.com.au/forums/topic/132670-wierd-gtr-problem-help/
Share on other sites

Just started it up when it was cold let it idle for a couple of mins, revved it between 2-3 grand, no tick or light.

took it for a drive, when it gets hot light flashes and tick comes back only when light is flashing.

So i guess it cant be a rocker/lash adj prob cos it would tick all the time?

Any GTR experts out there?

do you have a PowerFC computer? It uses the engine check light to warn of excessive pinging....sounds like what you are describing

The standard ECU is different it is cat overheating warning.

Got 2 opinions. One said its pinging so i got new plugs,fuel, octane booster and retarded timing just to be sure. Still there.

Then someone whos had a fair bit experience with RBs had a look at it and said it sounds like a shim issue on the inlet side. At least it's not big end cos i was starting to think it was.

Gonna take the rocker covers off and suss it out 2moro.

well the engine light is definatley the knock warning on a PFC. But is is possible that the noise that the sensors are picking is something other than pinging.

On the other hand....if the main time you are getting it is when you are going up hill under load.....

HI MAN

THE ENGINE LIGHT IS TELLING YOU THAT YOU ARE EXCEDING 60 ON THE KNOCK,THIS COULD BE DUE TO ENGINE RESONNESS,HITTING REV LIMIT OR ALSO PINGING.MY GTR GOES TO 45 AT REV LIMIT AND IF I PUT IN MORE TIMING ADVANCE IT EASLY GOES OVER 60.GOOD LUCK FINDING PROBLEM AND PLEASE LET US KNOW WHAT WAS CAUSING YOUR PROBLEM

STUART

Just checked all clearances and condition of shims. They're all within specs. I've got a nasty feeling its a big end knock and the sensor is pickin it up.

Anyway i've done all i can so i'm prob gonna take it down to Morpowa next week and let them suss it out.

Got it back from morpowa today after having it there for 2 days they reckon its a problem with number 5 or 6 piston. Probably a broken ring land or gudgeon pin issue.

I'm gonna pull it out this weekend or the next and strip it down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry theΒ  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel Β 
    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.Β Β  Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
Γ—
Γ—
  • Create New...