Jump to content
SAU Community

Jaycar Boost Controller,Fuel Adjuster,Turbo Timer


Recommended Posts

  • Replies 236
  • Created
  • Last Reply

Top Posters In This Topic

I'll take that iron kit funky.. i also forgot to mention that i need a multimeter... so can anyone recommend me which one i should get? theres alot to choose from and i have no idea.

yeah that multimeter aaron posted is good for these purposes.

I personally use this one:

http://www.jaycar.com.au/productView.asp?ID=QM1538

its got a data cable so you can use the included datalogging software to log signals (like from an ECU with the multimeter plugged into a laptop), temperature probe and duty cycle (great for seeing if your injectors are being maxed out etc).

A lil over the top for your needs though, I got by fine with a pretty basic analogue one for years... only moved up to this one when I started tinkering with the car and other gadgets.

Mr Void... no worries, figured you might already have access to one, but just made sure in case it had slipped you mind.

If possible could I order another boost controller and hand controller and cable + turbo timer

this would make my order

2x boost controller

2x hand controller

2x cable

1x turbo timer

let me know

cheers

Edited by Hootchy

sorry guys, got unexpectedly busy.

starting to send out PM's now. I'll give each one of you guys a total.

Hey Funkymonkey, haven't recieved a PM yet so presuming you have still been too busy to send the order through...

if this is the case is there any chance you could get an ST3024 for me as well? It looks like a cool little LED lead light.

If you can, and similar kind of quantity discount applies I'd ask the rest of you to have a look too if you don't have a good work light at home.

Full description here;

http://www.jaycar.com.au/productView.asp?I...=&SUBCATID=

productLarge_9590.jpg

Edited by Mr Void

yeah sorry guys, just got into melbourne yesterday for work... so I don't think I'll be able to collect the order from this group buy till later this week... so no reason why I shouldn't extend the deadline for putting orders in a little later.

Those of you that have recieved PM's you can put the money in now, or hold onto it till the new deadline... totally up to you. I haven't receved any payments yet, but I'll let you know as soon as I get anything.

If anyone needs their kits sooner, then please let me know, and I'll work something out for you guys.

Till then, group buy extended till Sunday the 1st of October.

Mr Void, the light comes to $31 incl GST. Let me know if you want it, and I'll add it to your order.

WogsRus here

Funkey Monkey,

If this is still running can i please have the following

1 x Boost Controller

1 X Hand Controller

1 x Cable

And freighted to Tasmania.

Can i have totals and when we have to pay by?

I will have money soon.

I'm letting this extend a lil longer as I'm still in Melbourne till this weekend at least :S

productLarge_9410.jpg

AA-0429BNR.jpg

1500WRMS Class D Amplifier Linkable

http://www.jaycar.com.au/productView.asp?ID=AA0429

RRP - $699

Group Buy Prices:

1 only - $540

2 to 4 - $500

5 plus - $457

postage might be a lil more than a PCB kit though :D

productLarge_9409.jpg

AA-0425BNR.jpg

4x100WRMS Full Range Digital Car Amplifier

http://www.jaycar.com.au/productView.asp?ID=AA0425

RRP - $399

Group Buy Prices:

1 to 2 - $309

3 - $285

4 plus - $261

productLarge_8744.jpg

Response Car Amp 4x100WRMS

http://www.jaycar.com.au/productView.asp?ID=AA0426

RRP - $300

Group Buy Prices:

1 to 2 - $232

3 - $220

4 plus - $209

Hey funky is the original group buy for boost controller etc still going to happen? I have not had a pm to my order yet

Ben

?? That's weird mate - I recieved all my stuff in the mail yesterday?!

Hehe.. only joking! no pm here either, I'd say he's a busy little monkey at the moment! that was very nasty wasn't it...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...