Jump to content
SAU Community

Recommended Posts

as in title, I want to know if anyone had managed to make a sub box with 2 x 15" subs fit in the boot of their R33. I may be buying someones entire stereo system and just wanted to know if anyones done it successfully before. I have asked him for dimensions but he hasn't got back to me yet and I may be able to get a smaller or differnetly chaped box made up anyway

thanks guys / girls

Luke

lol! each to their own. i don't see how a bassy sound system would be horrible. I think 'horrible' is what my stock standard factory system sounds like.

why would you want such an over kill of a stereo in the first place? It would sound horrible

How is it bassy? Where will you be sitting or standing when you are listening to it?

Did you know that a 63Hz sound wave (roughly the frequency of a kick drum) takes about 4.8 metres to travel so if you are any closer than that to the speakers you wont hear it.

as in title, I want to know if anyone had managed to make a sub box with 2 x 15" subs fit in the boot of their R33. I may be buying someones entire stereo system and just wanted to know if anyones done it successfully before. I have asked him for dimensions but he hasn't got back to me yet and I may be able to get a smaller or differnetly chaped box made up anyway

thanks guys / girls

Luke

Hi there,

I have an R33 series 1 4door, now i think that they are the same size boot as the coupe. You will probbably have a lot of trouble mounting 2 x 15 subs in behind the rear seat unless you sacrafice a lot of boot space. If you don't use your boot it should be easy. However i think that 2 x 12s would be much better. The difference that you would actually hear between 12s and 15s is very minimal. I mean on paper the 15s go deeper and rattle the car appart more. I have had 2 15s and 2 12s in my old car and the 12s were much better because they have a higher respons and better sound. (my opinion.) If you get something like Rockford Fosgate our soundstream you really would only need one 12. They are insane. However i can understand the need for symetry i.e 2 subs.

You will ahve to consider what amp you are going to use aswell. You should always overpower speakers so that your amps dont work so hard. By overpower o dont mean run them into thr ground i mean supply them with more power than they need.

Thats just my 20 cents. I have gone through a few stereos, but like i said before each to their own.

:(

How is it bassy? Where will you be sitting or standing when you are listening to it?

Did you know that a 63Hz sound wave (roughly the frequency of a kick drum) takes about 4.8 metres to travel so if you are any closer than that to the speakers you wont hear it.

In a car you will hear it, because the sound bounces around the car. You are right though, but that is more the case in a hall or big room. A human ear cant hear below 20-25hz or higher than 15khz (some exeptions) so when you buy a speaker that is rated to below 25hz it will just shake everything :(

they will fit but you will have to have the box leaned back probably greater than 45 degrees.

in my 32 the box is at about this angle to fit under the boot lid for a 12 inch sub.

the bigger the sub the further it will have to be angled back.

i dont know how much higher a 33 boot is than a 32 boot though.

you will most likely have to custom make a box

thanks for all the comments guys.

I would not usually be looking at 2x15"s but it was just a good looking deal I came across. I have previously had either 2x 10" subs or 1 x 12" to give me the kick I needed. I still might lean towards the single quality 12" over 2 subs as I will need some boot space left for the groceries!

any recommendations on a killer 12"? I have heard the Alpine Type R are decent but I must admit to not having much knowledge of models / brands...

I have a Focal sub.......on rails(8") fitted to my gtr33.

Fits nicely in the corner without taking up much room.

You really for 2 * 15 Inch subs should look at a custom job.

Get a good installer to quote you.

You will take advantage of the dead space in the inside of the boot this way.

Cheers.

Give me a couple of days and I should have part of my guide up for making a fiberglass sub enclosure.

I'm using a 15inch that I had for my previous car because I could be bothered selling it and buying a new one. It sits in one of the back corners of the boot. Pretty much the area I masking taped off in the attached pic. Just repeat for the other side of the boot and your set. You'll lose access to your jack though if you don't make them removeable.

post-28866-1157620156.jpg

check out sondstream for amps and subs, they are disturbing

i think there are a few on ebay for a really good price $300-400

im getting a 4 chan picaso soon =)~~

MA audio have a few good subs too

hey guys i got 2 10" comp subs in the boot of my sky, like the dude with the taped up areas showing where boxes go i got some pics of mine, ignore the fact that i havent finished carpeting the necessary areas. i have also shifted my jack to behind the extinguisher u can see in the pics, there is a small door cut out, check it out. i could have put 12" in but i kept my 10" comp subs instead and they still rattle the tits off the skyline.

only 1 hint of advice is that u remove the old standard car amp, in boot next to battery mounted to underside of parcel shelf and redo all the stereo wires, clearer sound.

post-31466-1157878268.jpg

post-31466-1157878279.jpg

post-31466-1157878289.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...