Jump to content
SAU Community

most rwkw with stock turbo & cooler???

Guest TUFR33

By Guest TUFR33,
in Engines & Forced Induction

 Share

Recommended Posts

benm Grand Master

benm

Posted
Posted

I agree 105%.

Similar to the story of my small mods trying to max out my stock ECU + Turbo rather then just taking the easy step of whacking on a bigger turbo.

Maximise what you currently have until you can't get anything more out of it, -then- start modding.

Guest TUFR33

Guest TUFR33

Posted
Posted
Originally posted by Steve .

Did you actually have a power figure in mind or are you just wondering what is possible?

Steve [/b][

/QUOTE] i was looking at the 200 mark, i would be happy with that,i have a dual stage turbo controller,so most of the time i run around at low boost!!!!!

rev210 Grand Master

rev210

Posted
Posted

TufR33,

Sorry for not answering the original q's. I get on my soap box a bit :(

A hiflow would be good, a modest sized intercooler upgrade (same flow as turbo spec). Fuel pump, reg and s-afc.

Nigasnt,

Ask yourself this (re: driverskill) : " how hard is it to drive in a straight line?". Not hard is it. :(

Don't go to a track day till you can or there will be trouble! :D

rev210 Grand Master

rev210

Posted
Posted

TufR33,

Sorry for not answering the original q's. I get on my soap box a bit :(

A hiflow would be good, a modest sized intercooler upgrade (same flow as turbo spec). Fuel pump, reg and s-afc.

Nigasnt,

Ask yourself this (re: driverskill) : " how hard is it to drive in a straight line?". Not hard is it. :(

Don't go to a track day till you can or there will be trouble! :D

Steve Grand Master

Steve

Posted
Posted

TUFR33, think you will have trouble getting there with a stock coola. Turbo should be OK, as several people have had over 200rwkw with the stocky.

You should be just ok with the fuel system if it is healthy to begin with, but will be at its limits.

You most probably will need some sort of management, unless you have one of these freakish series II ECUs, but time will tell.

I have just over 200 on a dyno dynamics dyno (tilbrooks), with power fc, EBC, pod (with partition and CAI), full exhaust - heat wrapped dump, FMIC, Z32 afm and 0.85bar boost. My injectors are on their last legs, as I guess my fuel pump will be too.

Hope this gives you some sort of idea - but there is more than one way to skin a cat, (or should the experession be updated to gut a cat...:( ) and there will always be slight differences car to car.

Lastly, you will have to get a new clutch - best do this one early as it is a bit disappointing (personal experience:p ) when you mod then cant drive it properly, or tune it properly till you upgrade the clutch.

Just my 0.02 hope it helps

Steve Grand Master

Steve

Posted
Posted

If you already have a mines chip, I wouldnt be expecting too much, but a SAFC2 definately wont hurt.

I believe some lads on here have quoted gains in the region of 10-20rwkw+, but I am not sure how much boost or with or without coola etc so I wont try and bullshit you - I really dont know.

Perhaps someone else might be better qualified to answer that one????

rev210 Grand Master

rev210

Posted
Posted
Originally posted by INASNT

rev

theres more involved in a 1/4 run that just driving in a straight line. U r just very moddest!

i so wanna see u run that time at calder, i dont think u can do it down here in melbourne

ha ha.. you are funny.:D

I would take you up on the challengen but, melborne is a fair way off.

Why don't you think I can do it, after all it's just a drag strip?

NismoR34 Grand Master

NismoR34

Posted
Posted

Its ON!

In the white corner...with 183rwkw and weighing in at a conservative :) u get the idea

Nothing wrong with a little friendly competition. Once I figure out the perfect launch and add a couple more mods then I will join in the fun. [that's a promise and a threat :)]

NismoR34 Grand Master

NismoR34

Posted
Posted

It is more fun, calder is good for a time slip etc but not as fun as what he said. I am always ready - u guys have a lot more mods though...but I dont care...

sorry - that was slightly off-topic!

just adding something more on-topic. mine has recorded 182rwkw with stock turbo and cooler ~ oh and just about stock everything else too :)

[only mods are pod filter, 2-3psi increase and cat-back]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • NZ-GTT
      R34 GTT Battery Relocation To Trunk

      By NZ-GTT · Posted

      I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      Damn... Not the feedback I want to hear.
×
×
  • Create New...