Jump to content
SAU Community

New Project

blackwrx

By blackwrx,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

blackwrx Newbie

blackwrx

Posted
Posted

I am thinking for my next project that I would like to get an old R33 skyline motor that is tires or has been blown a piston etc and complete a full rebuild on the motor etc.

This will be a slow project and as funds allow I will then try to chase up a shell or a cheap skyline to put the motor into.

I would prefer a motor that comes with everything, does anyone know of any?

What is the full potential of these motors? and what sort of power can a standard R33 skyline drivetrain handle?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/132804-new-project/
Share on other sites
Revhead Grand Master

Revhead

Posted
Posted

In any case, the "full potential" of a motor will vary depending on who tunes it, and how much money you have for parts, and development if you're not using an already-proven package. Even then, the actual power you make will vary a little, as no two engines are exactly the same.

If you're talking RB25, Hordcore Performance in QLD have one making 795rwhp (a bit under 600rwkW), I believe it's still 2.5 litres, ie it hasn't been stroked. That's the most powerful one that I am personally aware of, but there are no doubt others. I have no idea what kind of maintenance is required on this car but I'm guessing if something did go bang, that the parts and work required to fix it wouldn't be cheap.

RB26 - well the quickest one is the HKS drag GTR, which apparently puts out something like 1200kW. Completely unrealistic for someone on a limited budget but you did ask lol.

If I were you, I would build an RB30/25, particularly given that you're obviously on a budget of some kind but don't mind if it takes you a while to put together. A search will bring up heaps more details but basically this involves putting an RB25 head on an RB30 bottom end. Apart from giving you an extra 500cc to play with, it also squares the engine (bore/stroke), and RB30 blocks aren't too hard to get hold of. You can use an RB26 head but they cost a lot more.

Link to comment
https://www.sau.com.au/forums/topic/132804-new-project/#findComment-2461462
Share on other sites
blackwrx Newbie

blackwrx

Posted
  • Author
Posted

I am looking for an RB25 DET motor, I have rang all around perth today and I have had no luck in sourcing an old motor!

I am not really on a budget but it is just something I want to do slowly myself, then when ready I will buy a body or a cheapish R33 skyline to transplant the motor into. I dont want to buy a car and have it possibly sitting around for 12 months while I rip the motor out and do what I want to it. I think I would be aiming at around 500 rwkw.

All I want to do at the moment is source a motor to start on my project.

Link to comment
https://www.sau.com.au/forums/topic/132804-new-project/#findComment-2461858
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...