Jump to content
SAU Community

Recommended Posts

Didnt' one of us have an ex K-mart racing wing? I think it was Garreth he is, maybe ask him!

Yeah, Gareth has one. I know where he got it from, and there's none available. I put in an offer on the same wing... he beat me by about $10 :wave:

Richard: That's not a bad idea... It may be worth the severe beating I may cop! I was thinking more the 'rip and run' though haha :pirate:

hahaha I'll consider it Troy :dry:

The toughness of these standard engines are surprising me, and I've always been a big advocate of the strength of these engines... I just comp tested 162, 159, 160, 160 on my stock engine

Like this Troy??

05car2.jpg

  • 1 month later...

dean, gt wings are aid to make under diffuser work, you'll need a serious of both to make them work 100%.

we just wind tunnel tested under diffuser and wing, we will be releasing them in couple of months time.

we had all the setting now to make them. but they won't come cheap bro, wing and diffuser package around $2k.

if you want to see the car in action, look at the super sedan series, we tested on Kerrick sponsored swedish prestige saab this coming 25or 26th may at qld.

real racing is very serious matter, you will need a new front bar to aid the rear dean, your front is nono for downforce.

we also tested front diffuser angle too. :O

the setting are classified until product released.

well i have a wind tunnel at home troy. it's 1/10th scale though and powered by twin black and decker desk fans. as long as you can make a model of your spoiler small enough (no bigger than about 15cm wide) then I'm happy to test it for you. for the smoke trail I use a bong or sometimes a crack pipe if I'm out of pot. can only test for about 10 mins and then I can't smoke any more and the results become a bit wild.

dean, gt wings are aid to make under diffuser work, you'll need a serious of both to make them work 100%.

we just wind tunnel tested under diffuser and wing, we will be releasing them in couple of months time.

we had all the setting now to make them. but they won't come cheap bro, wing and diffuser package around $2k.

if you want to see the car in action, look at the super sedan series, we tested on Kerrick sponsored swedish prestige saab this coming 25or 26th may at qld.

real racing is very serious matter, you will need a new front bar to aid the rear dean, your front is nono for downforce.

we also tested front diffuser angle too. :P

the setting are classified until product released.

Hey Freddy, sounds interesting mate, I'll give you a buzz about it and come down for a chat to see the designs :)

Have you designed other front bars? I really would like to keep mine, but we can discuss options. I know the Kerrick car, but I'll take a closer look at it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...