Jump to content
SAU Community

High Pitch Noise

7yphon

By 7yphon,
in Engines & Forced Induction

 Share

Recommended Posts

7yphon Experienced

7yphon

Posted
Posted (edited)

Its only just started in the last few months and Ive been switching and changing shit, the only thing left to change is the turbo, but before I do this I want to rull something out.

It only starts when the engine is under load and doesnt always happen

me and my mates have been looking for leaks and we cant seem to find any

I have also changed the belts but it seems to be comming from the Turbo side

I have pulled all the pipes of and checked the turbo for any play and its still like brand new no movement.

Now I put 10w40 Minerial Oil in my car as a test so im hoping this hasnt caused the issue I was a little worried at first.

Any Ideas I took it to hyperdrive they said turbo, but they didnt really test anything they just heard the noise, and I took it to another macanic and he said it is possable the turbo, But if thats the case what in the turbo is making the noise?

It does sometimes happen when it nutural but not all the time.

Also there are two holes on the turbo on the exhaust side, Dont know what they are for but I have put two plugs in one keeps falling out but I think I have this one it tight could this be where the noise it comming from?

Edited by 7yphon
Link to comment
https://www.sau.com.au/forums/topic/132869-high-pitch-noise/
Share on other sites
Mr Italy! Proficient

Mr Italy!

Posted
Posted

Mine makes a kinda whistle from the turbo side of the car since i installed the splitfire coilpacks. It only really does it when im boosting, so i'm gonna assume mines turbo related - but you say yours sometimes happens on idle...

strange

Godzilla32 Veteran

Godzilla32

Posted
Posted
Mine makes a kinda whistle from the turbo side of the car since i installed the splitfire coilpacks. It only really does it when im boosting, so i'm gonna assume mines turbo related - but you say yours sometimes happens on idle...

strange

I had a chipped turbine blade (ceramic) which made a shrill/squealing noise. Only on full throttle though. Only takes a tiny little chip on a blade to throw out balance (im guessing) and cause a noise.

Hope this helps.

Deren

kasanoff Collaborator

kasanoff

Posted
Posted

I sometimes hear a high pitched sound - always low revs and at a particular load point. If I push the throttle or ease off it slightly, sound disappears...

Kinda sounds like a feedback noise when you hold a microphone too close to a speaker...

Is that the same as you guys?

Mr Italy! Proficient

Mr Italy!

Posted
Posted

^ haha no shit, mine does the same too! This is bad, two annoying sounds in the same thread and my car shares both of them.

The mechanic told me its the grease used on the starter motor catches dust and gets stuck after its done its job - he said a rebuild will fix it, using silicon grease so it doesnt stick to dust.

But my high pitched sound is exactly as kasanoff described. Happened after the Front mount and coilpacks...

7yphon Experienced

7yphon

Posted
  • Author
Posted

Mine doesnt always happen tho and only when at full boost and when the car is under a lot of strain but yer its a high pitched noise seems like im not the only one with this sort of issue :D

also yes it is imbarrising when you go flying past a car with a screeeeeeeeem comming from the engine

gtst25 Proficient

gtst25

Posted
Posted

If it's a screaching sound when it comes onto boost I'll put my money on an exhaust leak. It's pretty common on the rb20's to leak between the exhaust manifold to turbo gasket.

If one of those bungs you mentioned falls out all the time I'll bet that's what it is.

Some guys have pulled all the heat shields off etc and have found the turbo loose and with only one nut holding it on. I had a high pitched screeching noise on my rb20 when it came onto boost and that's what it ended up being.

Cheers

dead32 Mentor

dead32

Posted
Posted

my turbo sounds like a arnold swarzeneger with his nuts in a vice, realy high pitched from bout 3500 rpm (full load) i just figured steel wheel plus 18psi would make this noise, could also be the fact the internal gate bleeds off, possibly your internal gate is bleeding off cause high amounts of boost to be leaking under presure past the wastegate plate, does your boost hold solid? what amount of boost you running?

Rolls Grand Master

Rolls

Posted
Posted

My turbo also does this, a high pitched shreiking noise. Sounds like the turbine is scraping the housing or something, Only happens when you go from zero boost to full boost very fast eg on a gear change. Sounds like a wave as well, like itll do it for half a second then fade away and then fade in again. Ive got a split pulse dump pipe as well, so its possible its just weird turbulence or something.

Im assuming its the turbo being on its last legs but Ill wait for the exhaust wheel to end up in the cat before I change it.

otto Collaborator

otto

Posted
Posted
I sometimes hear a high pitched sound - always low revs and at a particular load point. If I push the throttle or ease off it slightly, sound disappears...

Kinda sounds like a feedback noise when you hold a microphone too close to a speaker...

Is that the same as you guys?

mine does exactly the same started doing it once i put on a pod so im guessing its because of the way the air goes through the pod at that particular point causes a whistle its definatly not a problem or because anything is shagged and i wouldnt be doin any major component changes to fix it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jumbotron
      Parts required for 4:11 diff gears in an R34 GTR Vspec (A-LSD)

      By Jumbotron · Posted

      Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • njdgomez23
      How to fix centre console latch.

      By njdgomez23 · Posted

      After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • marni
      I need more than help to finish my R33

      By marni · Posted

      Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • r32-25t
      Attesa pump mount options / ideas? R32 gtr style.

      By r32-25t · Posted

      From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • GTSBoy
      R34 Manual conversion Speedometer

      By GTSBoy · Posted

      Have you looked at the workshop manual?
×
×
  • Create New...