Jump to content
SAU Community

Recommended Posts

Well GTST25 was correct I looked at the turbo and it was only being held on by two nuts and they where loose also put two more nuts on and made sure they where on tight this time and she is all good :(

PS Does anybody know anything to stop this from happening again?

I know its cheap to get more nuts but I dont really want to keep replacing them every 3 or so months

Edited by 7yphon

something just happened to my turbo on my r33. When engine is revved and boost is starting to build up it makes a screaming noise, sounds something like an external gate. Its loud, sounds alright but i doubt it can be good for the turbo, took the intake pipe off, very very little shaft play back and fourth and turbo spins perfect, very free spinning also no chips on blades.

My 32GTR has a whistle noise all the time from 800 rpm to redline. I can hear it through the centre vents. I think it's from the Turbs but I cant determine what it is if its not even spooling (r34 N1's). Mech thinks the front turbo has a problem.

Like another post I'm going to wait until something drastic happens but sure would like to know for certain what it is.

PS. the engine has just been rebuilt - it was there before and it's there now.

i have the same high pitched noise coming from my car

it comes around from the turbo area side but im not sure when u listen close up it sounds like the other side

couple of people told me its normal and its possibly the powersteering pump

i just checked the 4 bolts and locktabs on the turbo and they are very tight.. im guessing its powersteering pump that needs replacing or its just normal and im getting paranoid :D

my noise happens when the car is warm, after a decent boost, then at idle you hear it whining and when you rev to 1500-2000rpm the whinding goes louder, but then u take it for a drive again and it disappears, then comes back and then disappears.. not to sure what to expect

anyone else had this and replaced powersteering pump?

Tiesto:

Do you have a front mount?

A mate of mine has a 4 door R32 and it made a noise like that turned out to be the Air passing through the Intercooler Pipes

LTHLRB:

I wouldnt because if the tubo is just hanging off you could make the turbo worse thats what Ive been told by Turbotech.

Sinister32:

I know what you mean can fix whats not broke right?

Mate i had a nasty squeal from my engine bay once. Couldn't find a boost leak, bad belt or anything. Then i realised i had some broken exhaust studs, started to fix these and realised the the turbo had come loose from the manifold (no idea why ??? bought the motor from a wrecker in sydney had it fitted by a mechanic) and the squealing noise was the pressure coming out from between the join. Long story short removed the turbo replaced the gasket and bolted it back together and wala :(. This noise was only on 3/4 to full throttle. Went heaps better after that, no shit :P haha

  tiesto said:
i have the same high pitched noise coming from my car

it comes around from the turbo area side but im not sure when u listen close up it sounds like the other side

couple of people told me its normal and its possibly the powersteering pump

i just checked the 4 bolts and locktabs on the turbo and they are very tight.. im guessing its powersteering pump that needs replacing or its just normal and im getting paranoid :sick:

my noise happens when the car is warm, after a decent boost, then at idle you hear it whining and when you rev to 1500-2000rpm the whinding goes louder, but then u take it for a drive again and it disappears, then comes back and then disappears.. not to sure what to expect

anyone else had this and replaced powersteering pump?

I have this one, my mechanic has explained the whine to me a while ago and ive kinda forgotten what he said, but something about the cams have now become worn in and its getting stuck doing its variable valve business when its idleing... Nothing to worry about he recons.

Worst explaination... ever.

well that might explain it cheers mr italy, i might get someone to take a look at it

ive also noticed that on my exhaust manifold there was a snapped stud (the last stud which is closest to the firewall), and the nut and half the stud fell out today upon further inspection... so now the other half of the stud is in there, i plan to fix that asap but i doubt its related as i dont have a exhaust leak, just a whining sound >_<

yer I have a stud missing from the man when I was changing the turbo back last year, When I removed the heat shield the nut and half the bolt fell off, I was like dam better fix that but doesnt seem to have made a dif so meh.

There are a few things this that makes noises that the f**king shitty thing you have to just try and go through the list until its gone :blush: at least you know most of the part that where replaced are new lol.

Edited by 7yphon
  • 1 year later...
  otto said:
mine does exactly the same started doing it once i put on a pod so im guessing its because of the way the air goes through the pod at that particular point causes a whistle its definatly not a problem or because anything is shagged and i wouldnt be doin any major component changes to fix it

Ahh! What is this noise (rb25 r34) Loose bolts turbo? Yep! Did them up, Ahh! Still there, Hint: does it on idle, tap the accelerator, gone?? Hard to find but seems to be seals on throttle motor (tract control) when engine is finally hot and under vacume there's that squeely noise. Anyone had this one before??? Cars done 94000klms just started. Those Whitty People with the flashy lights pulled us over "Whats under there mate a dead Cat" HA HA didnt even know what he was looking at any way. $79 Part of 2007 Label still affixed (I was going to scratch it off eventually), $200 Didnt like My HKS Induction.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...