Jump to content
SAU Community

Recommended Posts

can't answer your question but.......

both put together i'd still choose the one in your sig anyday, everyday. :)

yeah thats a very special "Skyfrine" :yes:

haha those 4 red cooking stoves at the back mean = very f**king fast in either way :D

See the stoves... beware!! hah

So you cant drive it on the road?

Pretty sure I read in HPI that it's not registered but it could be if they wanted it too. They would only have to raise the ride height a bit. The car still has climate control and all that shit so it could compete in the super stock class thing at Tskuba.

I'm not sure. Anyone know if its street registered? Either way I'm very sure the Mine's R34 Demo Car sets the benchmark when it comes to R34s on the track (Fatest tsukuba time of 57.7?). The Z tune is a few seconds off but I dont remember the figures of the top of my head.

Z is around 300 K right? Mines is half that correct me if Im wrong...

Think the Mine's is about 200k in Japan, and the Z-Tune was 170k US

But yeah, after speaking to Matt, who drove the Z-tune from Sydney to Melbourne, he said it was pretty comfortable, and absorbed bumps etc really well. I doubt the Mine's would be so forgiving.

The Suzuki Mightyboy wins hands down. The Daewoo Matiz just can't keep up with it's blend of style, practicality and sheer horsepower.

What were we talking about again?

Edited by Big Rizza

Well I've seen the Z tune in the flesh, actually touched it, and it's something to behold. Seeing it fly around Oran Park was something else.

Very impressive car.

I can't comment on the Mines car cause I've only seen it in DVD's. But damn it's impressive in those dvd's.

I think I'd take a Mines R34 GTR though. Just cause.. :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...