Jump to content
SAU Community

AVS Wheels.

Bleach1

By Bleach1,
in General Automotive Discussion

 Share

Recommended Posts

CNG Contributor

CNG

Posted
Posted

Bleach1,

Yes AVS wheels are definately worth something. What model do you have on your car? Have any piccies?

They have AVS model 5, 6 and 7. They also have a older model called VS-5 or something like that.

I have 18" AVS Model 5 on my new R33...they are my favourite wheel of all time so far. Pretty expensive if you want to get a set here I think. AVS are made by yokohama or one of the major jap tyre companies I think.

Hope this helps.

Link to comment
Share on other sites
CNG Contributor

CNG

Posted
Posted

Yeah, they are the older AVS model.

My brother has them in 17" on his GTR. Have to say that they are quite common on white R32's. About 99% of all the wheels i have seen in this style are white.

I think I have seen a set come up for sale here before, so if you want to checkout what they are worth, do a search on AVS wheels.

Link to comment
Share on other sites
Bleach1 Proficient

Bleach1

Posted
  • Author
Posted

well i only have 2 on my car now. I busted 2 guys stealing my wheels and they got away with 2 of them. Luckily a friend of mine had 2 wheels that looked similar as well so i put them on the front, except they are 17's so it looks a bit odd. Need to get a new set of wheels. Damn thieves.

Link to comment
Share on other sites
  • 3 months later...
  • 5 years later...
scathing Grand Master

scathing

Posted
Posted

The Advan AVS wheels are actually worth something, since they're made by a reputable manufacturer.

However, there are some knock-offs using the AVS moniker for their shit wheels.

Post pics of yours, if you want a more accurate response.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Nismo copper mix twin “pull” pedal height engagement

      By soviet_merlin · Posted

      I don't how much the car makes a difference or whether it is just a question of gearbox and clutch. On mine it's fine. Pull type Nismo coppermix twin (standard, not competition) on the 5 speed in my Stagea. OEM slave cylinder. Bite point is a few cm off the very bottom of the pedal. Clutch pedal all the way down to put in gear, and when heading off at the lights, there's a tiny bit of nothing and then it starts biting. And fully engaged before the pedal is all the way released. There's a bit of play at the top where the pedal does nothing anymore. Are you in Australia @ck_chino? If you are set on using a Nismo slave cylinder I have one new-in-box at home. Ordered it together with the clutch but didn't get it fitted. We can work something out if you want it
    • Butters
      Nismo copper mix twin “pull” pedal height engagement

      By Butters · Posted

      I am using a pull nismo coppermix twin in an r34 getrag box, had both the standard slave and  then the nismo one. Adjusted pedal to get bite point how I wanted , it is on the higher side, but would fully disengage past half way down.  I also read that the nismo slave won't work but I had no issues with the stroke, might become one later as clutch wears but 2+ years of happy motoring so far.  Take the above as one input only, specially as my setup is a bit unique in that I am using an S15 clutch master , cefiro clutch pedal, custom braided clutch line. Lots of variables at play. 
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Oh for sure, I'm just recounting my thoughts 😎 I'm not what you've got there to fuzt with.... likely my first idea was on the money -- rebuild or replace connectors. You can get a lot of connector stuff here  -> https://www.rapidcables.com.au/ Didn't look in the boot of mine, because I replaced these when I renewed the pump (plastic of connectors had gone brittle) edit: what I used... https://www.efihardware.com/products/2120/Deutsch-DTM-Connector-Kit-6-Pin ...cheaper... https://www.ebay.com.au/itm/364900039138
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      In no way was i suggesting it’s your fault mate. The trailer cable has a plug that I removed. I will have a closer look, but I did remove the trailer wiring cable with the tow ball as I don’t need it on my silo. i have replaced the fuel pump already there’s no need to remove the cradle again I can see the wire colours from it in.
    • Roy
      R32 Pix Only

      By Roy · Posted

×
×
  • Create New...