Jump to content
SAU Community

Move'n 2 Qld

0WN-3D

By 0WN-3D,
in Queensland

 Share

Recommended Posts

Konrad Grand Master

Konrad

Posted
Posted
hello all, as the topic says, im moving to QLD. where u may ask.. Emerald in fact!!

just wondering if any one lives there or Rocky or any where close

any way would b good 2 meet any one up that way,

Hey i'm not aware of any members that live up there but i work out there occasionally (just did 3 weeks about a month ago). I hope you have accomodation and a decent wage sorted cos its freakin expensive to live out there! rental prices are mad..

Didn't spot any skylines up that way - its v8's, landcruisers and minitrucks as far as i saw.

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2502465
Share on other sites
Konrad Grand Master

Konrad

Posted
Posted
Emerald is quite some way from the big smoke...

But Ska is up that way and would love to spot you driving around. He gets all excited when he sees a skyline cause there is not much up there... Other than dust and heat...

Emerald is about 250km inland from rocky...

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2502468
Share on other sites
85URK Grand Master

85URK

Posted
Posted

its no good owning a decent car when most of the road u have to travel are crappy outback ones, so that is why most ppl who live in these places have 4wd etc bcoz they need them to go offroad and also for there farms. skylines are just impractical out in those areas

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2506339
Share on other sites
Konrad Grand Master

Konrad

Posted
Posted
its no good owning a decent car when most of the road u have to travel are crappy outback ones, so that is why most ppl who live in these places have 4wd etc bcoz they need them to go offroad and also for there farms. skylines are just impractical out in those areas

actually daz most of the major roads are better quality than you'd think, i was pleasantly surprised. Still, if all you can afford is a farm shack then might be a different story. A couple of streets in toowoomba and inner brisbane have by far the worst major roads i've ever driven on in qld.

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2506961
Share on other sites
oldngrey Enthusiast

oldngrey

Posted
Posted

Most of the main roads are OK due to the fact there is a lot of traffic and money out there. I have seen a few lines around Moranbah and a few more in Mackay. Not too maney on this site. Also the amount of 4WD's have got a lot to do with the amount of money people make there and the fact that nearly everyone owns a boat and use the 4WD to tow them. I lived there all my life. Just moved to Brisbane 12 months ago.

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2507000
Share on other sites
0WN-3D Enthusiast

0WN-3D

Posted
  • Author
Posted

any of u actully been there, ROADS are all seald!!!

only off road shit is if u do own a farm,,,

i got offer'd a job working in the mine.. money will b no problem, no that it is now!, and free Accommodation, what else do u want...

another sik car build up is on the cards as soon as i get up there.

narrow'd it down to a few cars.. S15 spec R, R34 GTR or EVO 6 n up...

any way if any of u R Actually in rocky / emerald send us a pm...

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2523868
Share on other sites
BAMR33 Mentor

BAMR33

Posted
Posted
actually daz most of the major roads are better quality than you'd think, i was pleasantly surprised. Still, if all you can afford is a farm shack then might be a different story. A couple of streets in toowoomba and inner brisbane have by far the worst major roads i've ever driven on in qld.

Haha, i'm from Toowoomba and that's very true but you never really notice it because you can never get over 45km/h due to the number of old people on the road.

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2532356
Share on other sites
Jdfnq Proficient

Jdfnq

Posted
Posted
hello all, as the topic says, im moving to QLD. where u may ask.. Emerald in fact!!

just wondering if any one lives there or Rocky or any where close

any way would b good 2 meet any one up that way,

In Cairns....

Bout as close as you'll get

but if you are up this way let me know :P

Link to comment
https://www.sau.com.au/forums/topic/133559-moven-2-qld/#findComment-2556270
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      MAJOR FUEL ISSUES 25det neo r32

      By GTSBoy · Posted

      The smart thing is to actually locate the pump at the right point down the hanger, so that the strainer can stay sticking out at a right angle, but near the bottom. This is the perpetual hassle with retrofitting any different pump to the factory hanger. Some just go where you need it to, some need fiddling and faffing, and modifying of stuff.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Some updates. After a lot of praying and some inspecting of crank threads, we've found that they were both kinda munted but nothing seemed terminal. The other option was drilling and helicoiling the crank. That is obviously the last option so we decided to at least try to get a OEM GM bolt in to GM Specs. So after honing/linishing the balancer from it's .002" interference fit to a .0018" to .0015" to .0013" it eventually slotted on to the crank. ATI state the interference is nominally 0.0007-0.0009... so it's still snugger than ATI reckon and explains the issues we had to fit the thing to begin with. New GM bolt went in at 37 ft/lb then torqued 140 degrees after which was EXTREMELY   but it tightened up to 140 degrees and it was a lot of force. So all things considered, the balancer is secured to the exact specs that GM want with the OEM Stretch bolt, (that ATI say you can use..) and the balancer itself is seated and snug AF. So WOO. Engine is now back in the car with lots of swearing. Bellhousing bolts done up, driver side manifold is on, AC Compressor and hard lines are back on the car. Next step will be to connect various engine bits/wiring/intake/radiator etc. Then oil and coolant and ... test start it? And of course, looking into this issue... which actually doesn't look so bad - It looks like it can be twisted back into shape with a set of multigrips. Anyone wanna buy my bonnet? Boy it looks good over there and sunk cost sucks.
    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

      Also this may be a stupid question, but how would you recommend getting the strainer on a downwards angle ? as they tend to obviously clip to the bottom of the pump which usually sits level 🥴
    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

    • MBS206
      Is r33 gtr steering wheel the same as the gtst?

      By MBS206 · Posted

      Most of the R33 GTST S1 are all like "airbag? What airbag?!"
×
×
  • Create New...