Jump to content
SAU Community

Urgent - Brand New Nissan R32 Front Window Seal

Ronin 09

By Ronin 09,
in Wanted to Buy

 Share

Recommended Posts

Ronin 09 Grand Master

Ronin 09

Posted
Posted

Urgently chasing a GENUINE front window seal for R32.

Nissan AUS doesn't have any in stock and it is back ordered in Japan at the manufacturer (or so we're told).

Thought i'd post on the off chance that someone had ordered one or a shop has one in stock.

It's not that external bit of the seal (the bit you see), but the thin rubber / plastic seal that gets pressed in between the body and glass, then the trim bit of seal sits over it.

They are epoxyed in so a second hand one is no good... must be new and genuine.

Thanks

femno Grand Master

femno

Posted
Posted

Hey mate good to hear your cars coming along.

Does it HAVE to be genuine? After my car was painted the guy that put in my windscreen used some generic seal front and rear, almost looks better than the genuine one lol.

PM me if u want his number, he does a freakin mad job.

Ronin 09 Grand Master

Ronin 09

Posted
  • Author
Posted

hey matt- dammit I'm a bit of a perfectionist... going to do the ring around tomorrow to anyone who stocks nissan parts on the off chance they have any.

at worst I'll bung in an aftermarket and pull it out when a genuine comes in...

will let you know how I go - thanks! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Papichulo96
      Rb head oil drain dimensions

      By Papichulo96 · Posted

      Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...