Jump to content
SAU Community

Nissan Fast


Recommended Posts

OK! heres a Question who the nissan fast can idendify the interior trim colour and type? can you tell me how you did it? is says C

~~ hc33 003262 ~~

I hate the comon poo coloured laurels but there is a black/grey interior i would kill for. FAST says it has a build date of 89 01 so it would be eligable for import just missing the 88 model cut yes? i think its 89 jan and older that makes it. sorry but im learnin haha

Link to comment
Share on other sites

m guessing he mean BNR32 not HNR

heres the result

<<<<< P.S. how do i see the 'attached thumbnails' as I can't see anyting here.

Thanks for having a look guys, just went and double checked and go the other number if that helps.

HNR32-007303

with : KRNR32RGFSLMEB

the car is a gts4 not a gtr if that helps

thanks

Stephen

Link to comment
Share on other sites

should just be a small thunbnail you can click on.  

found the HNR number after i entered the model code then entering the 2nd part of the HNR code...bit strange...anyway here you go

thanks for doing that, only one prob for me at the moment is that I can't see any thumbnails. is there a setting in IE that stops me from seeing thumbnails

..

again , any help appreciated.

thanks

Stephen

Link to comment
Share on other sites

I have a S3 GTR apparently could be a 98...go figure. Having alot of trouble getting parts for the gearbox as it is different to all other GTR's for some reason. The car has factory leather also...weird. I also have a 56K issue. Could someone help me Pls. =)

here are all the details I could find

E-BCNR33

Chassis BCNR33-043389

Model GGJPRWFR33ZZA-EQ-C (changed)

FS5R30A (Trans type?)

RC41 (paint?)

thanks

matt

Link to comment
Share on other sites

That's not a valid chassis number as far as FAST is concerned.  Double check it.  Probably explains why Nissan can't identify the correct parts.

I double checked and it definately has BCNR33-043389 on the blue plate and fire wall. Maybe checking a few numbers out might give me an idea... ie 043387,043390, etc.

According to others my gearbox is the same as a R32 GTR ? not sure how that works.

Which part refers to the date of manufacture?

Link to comment
Share on other sites

I double checked and it definately has BCNR33-043389 on the blue plate and fire wall. Maybe checking a few numbers out might give me an idea... ie 043387,043390, etc.

According to others my gearbox is the same as a R32 GTR ? not sure how that works.

Which part refers to the date of manufacture?

FAST says that GTR #043388 was manufactured in April 1998, while 043390 was an Autech GTR also manufactured in April '98. Only Nissan knows why your car VIN is invalid, but you might be able to get away with buying parts using the 043388 number since at least theoretically yours should use the same production parts.

Yours should have a late series pull clutch type GTR gearbox, but I suppose it's possible an R32 GTR gearbox was fitted as a replacement at some time.

The date of manufacture is determined from the complete VIN.

Link to comment
Share on other sites

FAST says that GTR #043388 was manufactured in April 1998, while 043390 was an Autech GTR also manufactured in April '98.   Only Nissan knows why your car VIN is invalid, but you might be able to get away with buying parts using the 043388 number since at least theoretically yours should use the same production parts.

Yours should have a late series pull clutch type GTR gearbox, but I suppose it's possible an R32 GTR gearbox was fitted as a replacement at some time.

The date of manufacture is determined from the complete VIN.

Ok, cool. Sounds like it could well be a 98...crazy, can't say I've ever heard of a Series 3.5. Makes sense tho with the weird stuff it has on it, like big sump oil cooler, leather and nismo dials.

What is an AUTECH ?

I checked as my clutch and box is out and the clutch is a pull type. I'm going to the gearbox specialist tomorrow to check if some parts i orderd for a 12/97 and newer fit.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...