Jump to content
SAU Community

Recommended Posts

Mukyb0y,

Did you buy the pod that is on your car at the moment?

From the pictures it looks like the one i had on my car for a while (Was sold to me as a Blitz filter but was a $20 supercheap filter).

If it is, change to a brand name (ie. Apexi, HKS etc) and you will not believe the difference you will notice.

After changing from that to a HKS pod, it felt like i had bolted on a new turbo. More response and alot more power (car was wheelspinining after 4k rpm).

hmmm, i was actually wondering if an apexi pod would make any difference.

yeah, this pod was on the car, and i have no idea what brand, but it sux like a vaccum, so i left it on.

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

If ya dont want induction noises, you shouldnt own a turbo car.

You get used to the sounds after a while, it wont be that big a deal... and you must have your foot to the floort 24/7 for induction noise to be annoying you as much as you say it is...

my guess would be to custom make a box for your pod with a CAI, this will keep the noise down and also provide total cool air into the pod, which will prevent heat soke and maybe even increase the power a tiny bit.

i had a cai on my astra turbo and i could hardly hear my pod on that.

Mr Italy!: No i don't have my foot to the floor 24/7 ;-) if i had unlimited funds then i would but no. Dude if u put ur foot on the gas, just a little, go up a hill maybe, look at the boost gauge, does it go up? if yes then i get massive induction noise. The moment the turbo starts spooling up (boost gauge will go up now) it sucks hard core. the more i rev it the quieter it gets. so for no sound at all i gotta keep revs below 2200rpm or be going down a hill.

Jaker34: Trojan motorsport put he pod where it is cos they said is has proven hp gains. They left the little venty thing to allow cold air to go in the area, sure hot air might still be floating around maybe.

After some more prodding around, my pod is not a cheapo (i already have a cheapo lying around). I put the cheapo one on and i noticed less power and less throaty sorta sound but was still very loud.

Contacted trojan and they are getting a shorter adaptor in for me and will see what it does.

I did have a car previously with a CAI and yes it made a induction noise and yes it was fantastic. But this is insanely loud! Will try and get a recording of it from in the car just to show u guys the pain ;-)

when in 5th or equivelant going up a hill applying the smallest amount of throttle i get this really high pitch ring, i swear i can hear everything the turbo is winging about.

Okay, looked at the piping and nope can't see any noticable cracks, will get trojan to have a look too. Used my phone to record a video while driving to work this morning, will upload it tonight. It was a low budget production, stars my steering wheel and various gauges, guest appearences include rather loud induction noise.

Nah its a massive sucking, like quite loud then you hear the blow off valve. before i had the pod yea i could hear a hissing but now its completely different. I took a video thing but didn't really work well. Microphone isn't too good ont he phone. Neway you can roughly heare it if u pump the volume. Notice you can't hear the engine at all, can slightly hear wind as im moving but then quite noticeably the sucking. Not a good example though.

I think i may just be leaving it

Edited by 33Sedan

got a K&N pod

damned loud

so I put it inside Maxx's CAI - still damned loud

even filled up the CAI box with heat resistent foam stuck to the insides of the box (even the clear lid!)..... still f.damn loud when on boost.

hopefully it might quiet down a little when I bolt up the highflow turbo.

:P

Man its really hard. I am not sure if I wanna keep it. Really makes it more responsive etc, sounds cool, but is just too loud for me. Thinking of selling it. So if anyone from canberra wants it, they can come have a listen/buy for like $55. The pod and adaptor as pictured before in this thread. I mean yea its cool, but its not for me at the moment. think ill just go for a K&N panel for the stocko. ah well. If anyone is interested pm me. If noone buys it i guess ill just stick with it ;-)

Thanks for all the help though guys. I think maybe if i got a shorter adaptor it would maybe make it quieter but i couldn't be screwed and don't wanna waste money to find it dosn't improve it. If my car sounded/looked tougher i prob wouldn't mind but its sorta a loud "look at me" noise which dosn't suit it. neways. again thanks guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also sorry to hear this @DanielStone - I remember @SmoothLine well, he was around for a very long time and was one of the original members of this site.  God Speed Matt. Thoughts with his family and friends.
    • Nice car! Looking at your GTS; makes me wonder why I bought a GTS-t... Everything has been changed anyway. I should have just started with a non turbo model.
    • Rear doors central locking wiring removed and cleaned. See the first 8sec video of when it’s filled with river silt. its a snip of what I’m up against. front and rear doors complete now. Maybe another day removing carpet and bits and pieces. Then the re assembly begins. 🤙 att.DqweJqhY5MZiZYQDVMhn3LtvdD1RBZ7TBG4f2s7W1zM.mp4 att.lFuN22MZEowqCbFAXoDw009r2gHL76ChMVfxMfBX-uk.mp4
    • There aren't boost creep issues, it's not engineered around the restriction of the cats but if you haven't tuned the engine a full decat + exhaust can flow enough air to run off the end of the OEM load scales and you will get a pretty substantial reduction in ignition timing as a result. I recommend using DFCO, avoiding ignition cut limiters, and avoiding popcorn tunes along with running a cat unless you enjoy a perpetually soot-covered and potentially burnt bumper.
    • Small update, it's been slow moving over the Christmas period with money having to go everywhere thats not my car 😅. I got myself a little present to myself from "santa" in the form of some tidy radiator mounts from fitmint automotive to get rid of the stock ones that look like they have been in an accident before and then straightened by a caveman. I know I should've replaced the rubber bush at the same time but I had no idea how bad they were until I was replacing the mounts. Decided to order their dash mat while I was at it as I feel like I am lucky enough to have a pretty decent condition dash and I don't want to risk it being ruined while it's parked in the aussie sun while I'm at work. I have found another electrical fault to add to the evergrowing list to eventually chase down. Every time I replace my taillight globe it blows within a day of use, I'm starting to think my life would be easier if I took a few minutes to learn how to use  a multimeter 😂.   Had some luck with finding a series 2 drivers headlight on marketplace to replace my mismatched series 1 headlight, a subtle difference but it's nice to have a matching set of lights now.   I returned to the air con problem due to being sick of this summer heat, found a good condition condenser to replace my leaking one! I got it in the car and was happy when I got the thumbs up that the system was now holding gas. Sadly the compressor is not kicking in for some reason, we even tried branching the relay in the fuse box. I have tried to do some research on the issue with no clear understanding of what the fix is, so for now it will be placed on the backburner until I can be bothered to look into the wiring to the compressor. The last small mods I have done was cutting the horizontal vents out of the front bar, not really in a functional airflow sense but I just think it looks better as I am not a fan of the series 2 bar. I also switched the shift knob out for a hosoboyo aluminium grex style one, it has a really nice more direct driving feel than the outdated rubbery oem one. Thirdly, I chucked on one of the ebay bonnet strut kits. The fitment is decent and they seem to work fairly well. They have only given out once while the car was parked facing downhill, I think if I was working under the bonnet I would still put the oem hood stay up to be precautionary as to avoid getting a speedy concussion.
×
×
  • Create New...