Jump to content
SAU Community

Recommended Posts

Mukyb0y,

Did you buy the pod that is on your car at the moment?

From the pictures it looks like the one i had on my car for a while (Was sold to me as a Blitz filter but was a $20 supercheap filter).

If it is, change to a brand name (ie. Apexi, HKS etc) and you will not believe the difference you will notice.

After changing from that to a HKS pod, it felt like i had bolted on a new turbo. More response and alot more power (car was wheelspinining after 4k rpm).

hmmm, i was actually wondering if an apexi pod would make any difference.

yeah, this pod was on the car, and i have no idea what brand, but it sux like a vaccum, so i left it on.

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

If ya dont want induction noises, you shouldnt own a turbo car.

You get used to the sounds after a while, it wont be that big a deal... and you must have your foot to the floort 24/7 for induction noise to be annoying you as much as you say it is...

my guess would be to custom make a box for your pod with a CAI, this will keep the noise down and also provide total cool air into the pod, which will prevent heat soke and maybe even increase the power a tiny bit.

i had a cai on my astra turbo and i could hardly hear my pod on that.

Mr Italy!: No i don't have my foot to the floor 24/7 ;-) if i had unlimited funds then i would but no. Dude if u put ur foot on the gas, just a little, go up a hill maybe, look at the boost gauge, does it go up? if yes then i get massive induction noise. The moment the turbo starts spooling up (boost gauge will go up now) it sucks hard core. the more i rev it the quieter it gets. so for no sound at all i gotta keep revs below 2200rpm or be going down a hill.

Jaker34: Trojan motorsport put he pod where it is cos they said is has proven hp gains. They left the little venty thing to allow cold air to go in the area, sure hot air might still be floating around maybe.

After some more prodding around, my pod is not a cheapo (i already have a cheapo lying around). I put the cheapo one on and i noticed less power and less throaty sorta sound but was still very loud.

Contacted trojan and they are getting a shorter adaptor in for me and will see what it does.

I did have a car previously with a CAI and yes it made a induction noise and yes it was fantastic. But this is insanely loud! Will try and get a recording of it from in the car just to show u guys the pain ;-)

when in 5th or equivelant going up a hill applying the smallest amount of throttle i get this really high pitch ring, i swear i can hear everything the turbo is winging about.

Okay, looked at the piping and nope can't see any noticable cracks, will get trojan to have a look too. Used my phone to record a video while driving to work this morning, will upload it tonight. It was a low budget production, stars my steering wheel and various gauges, guest appearences include rather loud induction noise.

Nah its a massive sucking, like quite loud then you hear the blow off valve. before i had the pod yea i could hear a hissing but now its completely different. I took a video thing but didn't really work well. Microphone isn't too good ont he phone. Neway you can roughly heare it if u pump the volume. Notice you can't hear the engine at all, can slightly hear wind as im moving but then quite noticeably the sucking. Not a good example though.

I think i may just be leaving it

Edited by 33Sedan

got a K&N pod

damned loud

so I put it inside Maxx's CAI - still damned loud

even filled up the CAI box with heat resistent foam stuck to the insides of the box (even the clear lid!)..... still f.damn loud when on boost.

hopefully it might quiet down a little when I bolt up the highflow turbo.

:P

Man its really hard. I am not sure if I wanna keep it. Really makes it more responsive etc, sounds cool, but is just too loud for me. Thinking of selling it. So if anyone from canberra wants it, they can come have a listen/buy for like $55. The pod and adaptor as pictured before in this thread. I mean yea its cool, but its not for me at the moment. think ill just go for a K&N panel for the stocko. ah well. If anyone is interested pm me. If noone buys it i guess ill just stick with it ;-)

Thanks for all the help though guys. I think maybe if i got a shorter adaptor it would maybe make it quieter but i couldn't be screwed and don't wanna waste money to find it dosn't improve it. If my car sounded/looked tougher i prob wouldn't mind but its sorta a loud "look at me" noise which dosn't suit it. neways. again thanks guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...