Jump to content
SAU Community

Need Help

r3225t

By r3225t,
in Engines & Forced Induction

 Share

Recommended Posts

r3225t Apprentice

r3225t

Posted
Posted

Hey guys i need some opinions on this

I have an r32 gtst, its pretty stock engine wise just has a filter a cat back 3in and an early model safc,

its boosted to 14psi but it has a miss at full throttle (still has a miss even at stock boost), im pretty sure its not detonation, just a miss, i have changed the tps, afm, all the coils, and the cas, pretty much everything except the o2 sensor (because its fairly new) but it still does it, if i wind the fuel back slightly from stock it is better but still sometimes does it, its really annoying. Any good ideas anyone?

Link to comment
https://www.sau.com.au/forums/topic/133969-need-help/
Share on other sites
r3225t Apprentice

r3225t

Posted
  • Author
Posted

theyre s1 coilpacks, ive used them before on an rb20 they worked fine, i dont know if it changed dependng on engine temp cos dont thrash it when its cold and it never gets over normal operating temp, im sure its not the coils as this is the second set, i brought the timing back just slightly seems to be better, but i shouldnt have to retard it at all

Link to comment
https://www.sau.com.au/forums/topic/133969-need-help/#findComment-2488865
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Kinkstaah
      R34 Diff oil

      By Kinkstaah · Posted

      Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • GTSBoy
      Short shifter r34

      By GTSBoy · Posted

      Let's just fix the problem by f**king the rest of the gearbox.
    • GTSBoy
      R34 Diff oil

      By GTSBoy · Posted

      Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • Duncan
      Short shifter r34

      By Duncan · Posted

      How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
×
×
  • Create New...