Jump to content
SAU Community

Need Help

r3225t

By r3225t,
in Engines & Forced Induction

 Share

Recommended Posts

r3225t Apprentice

r3225t

Posted
Posted

Hey guys i need some opinions on this

I have an r32 gtst, its pretty stock engine wise just has a filter a cat back 3in and an early model safc,

its boosted to 14psi but it has a miss at full throttle (still has a miss even at stock boost), im pretty sure its not detonation, just a miss, i have changed the tps, afm, all the coils, and the cas, pretty much everything except the o2 sensor (because its fairly new) but it still does it, if i wind the fuel back slightly from stock it is better but still sometimes does it, its really annoying. Any good ideas anyone?

Link to comment
https://www.sau.com.au/forums/topic/133969-need-help/
Share on other sites
r3225t Apprentice

r3225t

Posted
  • Author
Posted

theyre s1 coilpacks, ive used them before on an rb20 they worked fine, i dont know if it changed dependng on engine temp cos dont thrash it when its cold and it never gets over normal operating temp, im sure its not the coils as this is the second set, i brought the timing back just slightly seems to be better, but i shouldnt have to retard it at all

Link to comment
https://www.sau.com.au/forums/topic/133969-need-help/#findComment-2488865
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 路 Posted

      So, what did you decide? If these items were going in and out of stock, you could at least order the two in-stock pieces. Also, I'd say the stock bit of airbox isn't that restrictive to your NA motor. To test if it is, fit a vacuum gauge between the airbox and throttle body. At WOT do you measure any vacuum?
    • thomasLait
      Stagea obd II low voltage

      By thomasLait 路 Posted

      Hey guys I have a 2001 Nissan stagea vq25det, I don't have any engine lights and not really any issues running but I was curious to see if I could use my obd II scanner to find anything that was hidden and I plugged my scanner in and it just said "Low voltage cannot scan" does anyone know how to fix this or what this could be?
    • The Bogan
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By The Bogan 路 Posted

      Fixed....LOL Sorry 馃お
    • niZmO_Man
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By niZmO_Man 路 Posted

      Sadly we have something in common, our Skyline's like blowing up electrically 馃槩
    • The Bogan
      NC MX5

      By The Bogan 路 Posted

      So, no videos, but, the FAB9 Elite manifold and 68mm Bosch throttle bodies are in stock, but, not the rear part of the air box The FAB9 rear airbox thingie is made with a 3" intake pipe, to suit the 3" intake pipe size of a 68mm throttle body  When they get some more in stock is currently unknown as I'm waiting for FAB9 to reply with a ETA on resupply, my assumption is they outsource their plastic printing stuff to "china", and with the current "tariff war" going on in 'Merica it could be on hold for an undisclosed time Should I pull the pin on the Intake and throttle body, and wait for the airbox?????, that's what I'm thinking... 1. Would the standard 2.75" OEM intake on the air box really be that much of a restriction compared to the 3" naturally aspirated?????? 2. If I don't get the 3" FAB9 airbox fitted at the same time as the intake and throttle body will it need a retune, when/if it eventually turns up?????? As I'm impulsive, to a fault, decisions will be made within....."what's the time now"???....let's say 12 hours......LOL
脳
脳
  • Create New...