Jump to content
SAU Community

Recommended Posts

  Omurru said:
acetone, shellite or isopropyl alcohol is very very good for that sort of stuff if you can get your hands on any. I find petrol tends to leave a residue.

are any of those harmful to the engine or combustion?

You gotta take all of the pipes out and core and flush em with somthing like acetone, something that doesnt have an oil content in it. Acetone will turn into vapor in like a couple of seconds so it leaves no residue and no oil.

Yeah id use shellite. Im a cleaning nut..even I wouldnt really bother doing it unless you gotta take it apart...If your engine is healthy there shouldnt be anything in there. I guess over time a little oil residue may build up. I can only really see a point in flushing the core as its the only part that will create enough resistance for residue to build up...

Edited by Godzilla32
  darK said:
are any of those harmful to the engine or combustion?

nope they all go bang when you put a match to them :sick:. As said above Iso or acetone/acetate are the best things leave no residue at all so no worries :(

I just read in the latest hot 4s tech handbook that you should just use degreaser and rinse well. I have just done this but haven't driven it yet. Hope this will be ok?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 馃檪  I know what it looks like  
  • Create New...