Jump to content
SAU Community

Recommended Posts

Hi,

As above, I'm after a kit for my R33 but i want somethinig that is freindly for the roads, car parks etc.. Is the GTR front bar passable? in some pictures it looks abit low, the front bar is the biggest concern as the rear bar and side skirts are allready decided. i've got 19's and it has been lowered 2 inches

Cheers

Link to comment
https://www.sau.com.au/forums/topic/134075-road-friendly-body-kits/
Share on other sites

Guest IH8VEE8S

depends how bad the carparks, humps, driveways, etc are. i've got the gtr front bar and my car is stock height (very high) at the front and i've scraped it a few times on 3 different driveways. but i wasn't being careful and the driveways were bad......so yeah you're pretty much f**ked if yours is lowered lol :D

Edited by IH8VEE8S
Hi,

As above, I'm after a kit for my R33 but i want somethinig that is freindly for the roads, car parks etc.. Is the GTR front bar passable? in some pictures it looks abit low, the front bar is the biggest concern as the rear bar and side skirts are allready decided. i've got 19's and it has been lowered 2 inches

Cheers

u got some pics bro? and wer about u from?

its partly the bodykit, partly your suspension. if your car is dropped on its testicles then most kits are going to scrape.

i have a copy of a bomex front bar. its about 2 inches lower than standard and my car is lowered about 1.5 inches and a rarely scrape, but i'm pretty careful.

find a bar that does not protrude out much more than the stock bar and you should be fine...stay away from URAS front bars...they stick so far out its not funny, u'd scrape without even lowering it going up driveways.

Thx for the update N15M0. hahaha

On a serious note, yeah the URAS kit does stick out alot. the rear bar scrapes like there is no tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...