Jump to content
SAU Community

Recommended Posts

Is it an AVC-R? It seems to me that it a few mm too big to fit in there. I've got mine where the ashtray was but obviously that's not out of sight.

My PFC hand controller just floats around and ends up under the passenger seat a lot. Maybe you could do that. The cord is long. Maybe have some mount that it easily slips out of then you can slip it under the seat or into the glove box whenever you need to.

you can do it, i've seen it done a few times and planned to do it myself, abo bob is right, its a little to big to fit in so you have to cut a hole in the top of the din pocket and slide the avcr down into it. I made it work but never got around to fitting it. I've left it in my glovebox (also to hide it). Too much of a hassle cause i have double din headunit and can't be bothered buying a new one.

Yeah i've done it (but the sin din pocket with Lid is from a X-trial, becoz r33's dun come with em standard)

With lid closed

post-9504-1158425515.jpg

With lid open to adjust boost settings and check max boost reached :D

post-9504-1158425587.jpg

1. The Avc-r will fit BUT its too tall for the pocket so you gotta make a hole in the pocket to have a bit of the avc-r sticking out, BUT as you can see once its all in it fits perfectly you don't miss out any of the screen and it doesn't hit the air-con or cd player.

2. So start CUTTING! hahaha

Good Luck!

Yeah i've done it (but the sin din pocket with Lid is from a X-trial, becoz r33's dun come with em standard)

now im spewn, i bought an orig r34 pocket & the lid only goes 3qtrs down. i hope it wont be too hard to fit.

i do like the sunvisor idea.

Gtshortie - thanks for the pics

cheers

steve

why dont u try putting it in the pocket under the headlight adjustment......u no wat im talkin about yeh?>??

cant explain it very well but its like right next to the steering wheel on the right.

according to the engineer when i had my car certified, technically the AVCR is legal, as all it does it slightly alter the amount of boost you get. The same effect can be given (albiet to a lesser extent) by driving in Blue Mountains one day, and Sydney the next (elevation / air temp) apparently.

well i got a canary for it when i got pulled over. They said that you are unable to have any adjustment to the emissions control of the car. and a boost control does that. "apparently".

any excuse to stop imports from allowing there full potential. in victoria.

cheers

steve

Sorry guys i forgot to say that my lid only opened 3/4 as well, BUT someone accidently dropped something from the windscreen and it broke the lid off so now i've got velcor holding the lid on.

its good to see the boost peak, to make sure there's no spiking.

also once its tuned ill have 3 settings, low-mid-hi.

i know what u mean as i never change it now, but once its tuned it will probly be changed a few times. at the set of lights next to my mate in his wrx or when i take it down the qtr mile etc.........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...