Jump to content
SAU Community

Swaybars

salad
 Share

Recommended Posts

pkblade Experienced

pkblade

Posted
Posted

I have the Selby's R33 GTR rear sway bar on my R33 GTS-t, & according to the whiteline parts list it's also interchangable with the R34's, S14 & S15. The main difference between the R33 GTR & GTS-t OEM rear sway bars is their thickness.

Not sure about the front but, if it helps the R32-34 GTR's all seem to share the same front sway bar.

Link to comment
https://www.sau.com.au/forums/topic/134377-swaybars/#findComment-2497137
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
will R33 GTR swaybars fit R32/S13?

i know R33 GTS-t rear swaybars fit R32/S13

i assume R33 GTR swaybars are the same as GTS-t?

need to know if front will fit too

cheers

Front stabiliser bars on 4wd's are different to the front stabiliser bars on 2wd's. This is because the front subframe is in a different place on the chassis.

:dry: cheers :D

Link to comment
https://www.sau.com.au/forums/topic/134377-swaybars/#findComment-2497330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • elohim_imanu
      R33 Rear Skyline Light Up Garnish

      By elohim_imanu · Posted

      I also built one, for a bit of a laugh. Pretty happy with it. Basically, obtained a clear garnish, painted it sanded back the paint off the letters, clear coated it. Inserted a 3cm EL strip through a slot I created in one end and sealed it up.
    • perry_r33
      Apexi SAFC AFC 1st Gen Knob Style With Box & Apexi SAFC 2

      By perry_r33 · Posted

      Apexi SAFC - AFC 1st Generation Rare Old School JDM As you can see it all lights up in the photos and is in 100% working condition. Has been kept in storage and boxed for years there won’t be to many like this if any! Especially with all original packaging and manual. price:$650   APEXi SAFC 2  In Complete Working Condition Refer To Photos and view the video provided.  Price:$500   Located Melbourne - Australia Wide Postage Available At Buyers Expense  IMG_6981.mov
    • 84eighty
      So i brought a boat...

      By 84eighty · Posted

      wow so i just logged back in after buying the 33 and joining SAU, And I've got all a whole bunch of you wanting to know more, well unfortunately it still doesn't run i was hoping it was seized from a snapped timing belt as i turned it over by hand and it was fine and then it did a few revolutions and jammed solid when i was running it with the key, so the timing belt is mint, I've also found a lot of the parts I'm removing have already got bolts undone or not quiet tight enough to be unsuspicious. so the plan is to find a running RB30 block and chuck my head on it.  I have a habit of buying stuff I don't need or require so for my none running engine i have a forward facing plenum , Apexi power fc, 40mm Turbosmart wastegate, And for the car its self coilovers ,low seat rails and BRZ seats (black seats with red stitching i already had these and they are ADR Approved and allow rear passengers access)  
    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      I took apart the dash and found this strange 2 pin connector. it dosen't seem like its factory or oem, any clue on why someone would add it and where it might have been connected too?    
    • Dose Pipe Sutututu
      I need more than help to finish my R33

      By Dose Pipe Sutututu · Posted

      Not mention a SS2 especially with that rear oddly small rear housing. I feel the Facebook mechanics and experts has led OP in the wrong direction.
×
×
  • Create New...