Jump to content
SAU Community

Recommended Posts

Hey gang, it's here in my possesion finally.

Quick question ; headlights in the grille, how do I turn em on?

Apart from that, everything is perfect, very happy with my purchase.

picsorban!

err.... next to the headlights.. try the other switch on the stalk....

Taking a big stab in the dark here, I would say a series 2 stag?

ETA: Congrats on the purchase Matt :( Enjoy your new car :P

Bingo.

Thankyou.

it's filthy at the moment, good wash tommorow, then RWC then slap some plates on it.

I've tryed every combination of getting the grille lamps on but to no avail, so i'm guessing it's globes or fuses!

Today at work, flicking through the paperwork from Shogun, it's detailed that the grille lamps where disconnected for compliance.

Mystery solved.

On another note, how many freakin combinations of headlights do these things actually have?!

I seemingly have two sets of foggies, the headlights with there assosciated beams and the lights in the indicators which again have foglights!!

My highbeams certainly don't come out of the grille lamps.

They come of the main lights.

The only aftermarket lights I have are some yellow fog spotties that seem to be a really flush fit in the DAYZ front bar, perhaps factory option?

They are quite big.

any pics matt? would like to see that front bar if possible.

i'd be calling the compliance workshop and asking them why they disconnectred the main high beam lights as i have never heard of them having to do that?

cheers oxford

.................. general merrirment

LOL - love it... that'd be a damn funny online-gamining or forum name :P

got a few performance mods planned ?

nice car hey, good pickup. Ive got nissan spots in my S1.

pic from compliance 2 septembers' ago:

post-18854-1158909782.jpg

Edited by Tangles

As far as go fast mods go, just doing lowered spring and shock combo, turbo back zorst, fmic, pump and boost controller.

Might even go a highflow, everyone seems to be going on about them.

Full manual conversion, collecting the parts as we speak.

I just want some beef in the mid range and i'll be happy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...