Jump to content
SAU Community

Recommended Posts

Hey gang, it's here in my possesion finally.

Quick question ; headlights in the grille, how do I turn em on?

Apart from that, everything is perfect, very happy with my purchase.

picsorban!

err.... next to the headlights.. try the other switch on the stalk....

Taking a big stab in the dark here, I would say a series 2 stag?

ETA: Congrats on the purchase Matt :( Enjoy your new car :P

Bingo.

Thankyou.

it's filthy at the moment, good wash tommorow, then RWC then slap some plates on it.

I've tryed every combination of getting the grille lamps on but to no avail, so i'm guessing it's globes or fuses!

Today at work, flicking through the paperwork from Shogun, it's detailed that the grille lamps where disconnected for compliance.

Mystery solved.

On another note, how many freakin combinations of headlights do these things actually have?!

I seemingly have two sets of foggies, the headlights with there assosciated beams and the lights in the indicators which again have foglights!!

My highbeams certainly don't come out of the grille lamps.

They come of the main lights.

The only aftermarket lights I have are some yellow fog spotties that seem to be a really flush fit in the DAYZ front bar, perhaps factory option?

They are quite big.

any pics matt? would like to see that front bar if possible.

i'd be calling the compliance workshop and asking them why they disconnectred the main high beam lights as i have never heard of them having to do that?

cheers oxford

.................. general merrirment

LOL - love it... that'd be a damn funny online-gamining or forum name :P

got a few performance mods planned ?

nice car hey, good pickup. Ive got nissan spots in my S1.

pic from compliance 2 septembers' ago:

post-18854-1158909782.jpg

Edited by Tangles

As far as go fast mods go, just doing lowered spring and shock combo, turbo back zorst, fmic, pump and boost controller.

Might even go a highflow, everyone seems to be going on about them.

Full manual conversion, collecting the parts as we speak.

I just want some beef in the mid range and i'll be happy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah its bad eh. Ey! Watch your mouth. Yep, spot on. The rear's are always gone too though from brake checking. I had them perilously close to a tree that we had taken down. I think the tree peeps may have taken it. Either for a trophy, or accidentally.  
    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
×
×
  • Create New...