Jump to content
SAU Community

N.s.w P - Platers Plz Help Me!

Viper_5345

By Viper_5345,
in New South Wales

 Share

Recommended Posts

Viper_5345 Explorer

Viper_5345

Posted
Posted

G'day all, im one of those unfortunute people who got there license about 3 days after the july 12th cut, and i need an exception to drive a turbo car, and i was wondering if anyone here has got a tubro skyline, and they have got an exception for it???

i was just wondering what sort of information you told the RTA to get one, what resons did u use?

did u find it easy etc. this would be a great help to me, considering im about to buy a r32

thanx guys! :P

Link to comment
https://www.sau.com.au/forums/topic/134870-nsw-p-platers-plz-help-me/
Share on other sites
TRUBLSM Mentor

TRUBLSM

Posted
Posted

one word. IMPOSSIBLE.

They WON'T give them out, even if thats the only car in the family.

this is what happend to a friend.

he had a 200sx and a rx7.

his sister applied for the rx as it's the only car she can drive in the family, they replied with no, sell one of the cars and buy a new one..

once again it is impossible.. don't bother, buy a na 32 like i did.

nfi Community Regular

nfi

Posted
Posted
yea i was one of the lucky ones

i got my P's 2 days before the cut off ... and i didnt want to sell my car

i had fun driving around with no licence for half a year and neva got caught hehe

my bro is getting his P's soon and al so gonna buy a turbo car....i also wanna hear if any can get around it

Your an idiot.

Comments like that destroy the scene for the rest of us.

Good luck surviving the rest of your teens with an attitude like that.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...