Jump to content
SAU Community

Interesting Bathurst Info.

mad082

By mad082,
in Motorsport Discussion & Builds

 Share

Recommended Posts

mad082 Grand Master

mad082

Posted
Posted

i was just flicking through the history books at bathurst results, and here's what i found.

in 1989 the winner and second place cars were ford sierras. they were both on the final lap.

1 lap behind were 2 hr31 skylines. the qualifying time of the 1st place sierra was 2:16.79 by dick johnson/john bowe, and dick held the fastest lap. the qualifying time of the fastest r31 (NOT jim richards/mark skaife) was 2:19.64.

in 1990 the winner was a vl commodore. second was a sierra. jim richards/mark skaife's gtr was in 18th place, abuot 15 laps behind. they did set the fastest lap of the race, but were out gunned in qualifying by the sierras. (gtr=2:15.66, sierra driven by brock=2:14.71 (but that wasn't the quickest))

in 1991 the gtr took 1st and 3rd with a vn in the middle. the vn was 1 lap behind, and the second gtr another lap behind that. fastest race lap was again the gtr.

then came 1992, and the controversial win for the gtr. the race was called off on lap 144, just after the gtr crashed into the wall, and take back to the results at the end of lap 143. this gave the win to skaife/richards. followed by the sierra of johnson/bowe on the same lap. fastest lap of the race was the gtr, 0.2 of a second quicker than the sierra. qualifying was a different story however, with the sierra clocking 2:12.898 and the gtr 2:14.546.

so just a few facts for the people who weren't old enough to remember the gtr at bathurst or thought that nothing else even stood a chance. the gtr did get beaten, and didn't qualify the best.

Link to comment
https://www.sau.com.au/forums/topic/135100-interesting-bathurst-info/
Share on other sites
  • Replies 110
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

djr81 Grand Master

djr81

Posted
Posted

What you need to understand was that for the 1990 race the GT-R was completely unsorted. It had only just been finished and was, by all accounts, a horrible thing to drive on the Thursday/Friday/Saturday before the race.

Only one car was entered, & from memory it broke a drive shaft - hence the reason for the missing 15 or so laps. Skaife got told to go out & drive it as fast as it would go in the hope of learning a bit more. The lap record was the result of that instruction.

RS500 Experienced

RS500

Posted
Posted (edited)

those definitely were the days of motor racing.

i always loved how the sierra's would pull away from the GTR's up mountain and down conrod straight :rofl:

it was a totally different story up on the mountain though :/

all in all, the cossies did very well for under tyred, RWD, 2L turbos.

Edited by RS500
Ant97GTR Grand Master

Ant97GTR

Posted
Posted

I also have heard (on very good authority I might add) that the sierra turbos didn't exactly conform to the rules and regs at the time :P

...that might explain the ability as djr81 posted above to reliably push so much boost through the motor :rolleyes:

djr81 Grand Master

djr81

Posted
Posted (edited)

HRT used to front at Bathurst (Well, Tom Walkinshaw mostly) and basically protest the living crap out of every competitive car there was. Mostly this involved lodging protests against the vital bits of the opposition cars - in the case of the Sierras the turbos were a favourite because they were so damn critical to the set up & on a knife edge to get maximum horsepower. It used to put the teams to alot of work & disrupt their preparation - which was mostly the point of the protests. I can only recall one instance of a protest on thsose grounds ever being upheld & even then I think it was over turned on appeal (Colin Bond's Sierra, if memory serves)

The ironic thing was that the HRT cars were rubbed out when the Ford teams got sick of the carry on & lodged counter protests for illegal steering racks in the VL's.

Just another reason to hate those from the dark side.

Oh, yeah & according to Allan Moffat his RX-7 actually came second in 84. So no 1 - 2 for the HDT.

Edited by djr81
GT-R LM Proficient

GT-R LM

Posted
Posted

funny, no one mentioned that the r32gtr had carried (200kg i think) extra weight and boost restrictors in efforts to give the other cars a chance(still didnt work). Remove them and see if any sierras would of went past.The sierras were boosted to shithouse and were just marginally quicker down conrod.

Theres a reason the GTR got called GODZILLA :)

Roy Grand Master

Roy

Posted
Posted
What you need to understand was that for the 1990 race the GT-R was completely unsorted. It had only just been finished and was, by all accounts, a horrible thing to drive on the Thursday/Friday/Saturday before the race.

Only one car was entered, & from memory it broke a drive shaft - hence the reason for the missing 15 or so laps. Skaife got told to go out & drive it as fast as it would go in the hope of learning a bit more. The lap record was the result of that instruction.

Excuses, excuses. In an endurance race it wasnt as reliable as the VL Walki :happy:

And it was introduced earlier in the season by Mark Skaife to get some development kms on it. Richards stuck with the R31 as he was shooting for the SATCC (which he ended up winning). So it had races under its belt.

mad082 Grand Master

mad082

Posted
  • Author
Posted
Theres a reason the GTR got called GODZILLA

being the only 4wd in the pack it would shit all over them off the line. which i do see as an unfair advantage. they could hold it at 7500rpm and just side-step the clutch. that doesn't take much delicacy. had the gtr been forced to run in rwd only i think it would've been a completely different story.

as for the djr sierra. he was running the most powerful sierra of the time. he took 1 of his cars over to europe to race and was about to lap second place when the turbo blew.

but what annoys me about it all is that people are arrogant and say the GTR kicked butt, but don't take into account that holden was the only v8 there, the bmw's were non turbo 6's, and the fords were 4 cyclinder turbo's, and the gtr was 4wd, so it had a massive advantage off the line, out of corners, and in the wet. so had the GTR not been so dominant i would've been worried.

ish Proficient

ish

Posted
Posted

yeah but it was never considered a threat either by dinosaur cubic inches heads and sAfrican Americaned at.... it taught lessons!!! thats why all the kafufal.

being knobbled like it was and to still smack ass is australian HISTORY now except it !

GT-R LM Proficient

GT-R LM

Posted
Posted
being the only 4wd in the pack it would shit all over them off the line. which i do see as an unfair advantage. they could hold it at 7500rpm and just side-step the clutch. that doesn't take much delicacy. had the gtr been forced to run in rwd only i think it would've been a completely different story.

as for the djr sierra. he was running the most powerful sierra of the time. he took 1 of his cars over to europe to race and was about to lap second place when the turbo blew.

but what annoys me about it all is that people are arrogant and say the GTR kicked butt, but don't take into account that holden was the only v8 there, the bmw's were non turbo 6's, and the fords were 4 cyclinder turbo's, and the gtr was 4wd, so it had a massive advantage off the line, out of corners, and in the wet. so had the GTR not been so dominant i would've been worried.

It wasnt just the 4wd it was the whole package buddy. Like i said before you think the sierras were good, why dont you watch a couple jap group A races and watch the seirras get left like they a barina's. :happy:

Mandingo Proficient

Mandingo

Posted
Posted
had the gtr been forced to run in rwd only i think it would've been a completely different story.

Wrong again. The GTR's in JGTC were RWD and they still owned all. after the calsonic R32 won every race the whole season they were made to drop the 4WD.

Roy Grand Master

Roy

Posted
Posted
Wrong again. The GTR's in JGTC were RWD and they still owned all. after the calsonic R32 won every race the whole season they were made to drop the 4WD.

Japan like every other country adopted their own rules after the passing of the Grp A regs. And when you look at the quality and speed of cars in other championships Australian Grp A cars were some of the quickest around. I would go as far as saying that if Glen Seton rocked up to a Jap round, ditto John Bowe then the Jap GTRs would have got a fright.

If Jim Richards had rocked up to a Jap round in the Winfield car, they would have all been convincingly beat by Gentlemen Jim.

Sorry but the Japanese do not know how to build the quickest race cars :happy:

sav man Grand Master

sav man

Posted
Posted (edited)
Sorry but the Japanese do not know how to build the quickest race cars :)

That's why they stole all the parts from the Gibson GT-R's :happy:

I thought all the winging about the seirra's was that they were ment to have a set boost level and not adjust it through the race. But at Bathurst, they wound the boost up to get a lead, and then wound it down to 'cruise' home. But Holden worked out all they had to do was keep up with em till the poor old turbo's exploded.

I wish we still had Group-A and the Group-A WTCC :ermm:

Edited by sav man

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • TurboTapin
      RB25DET Solid lifter conversion

      By TurboTapin · Posted

      I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...