Jump to content
SAU Community

Recommended Posts

Hey guys,

iv got a set of East Bear R34 GTR seats charcoal in colour, goes well with the standard interior of the series 2....

I purchased them in feb this year for $2400, with the bride seat rails from powerplay imports, they are in very good condition no damage on them wat so ever, like new...

At this stage i am 100% sure that they will fit into an r33 and an r34gtt (seat rails that is), not sure about the r32 yet, but will comfirm. this seats and rail combo is perfect, they sit at a good level not too high and not low, they are slightly lower then the standard seats..

guys these seats are awesome, i am only selling them because my car will be gone soon, and i have no car for the seats, they look exactly the same as the genuine ones, except for the material.. if they dont sell then they go in my next car :( much better then recaros :)

they are still in the car at the moment, any one is welcome to come see them...

ASKING PRICE: $2000 now $1500 RAILS NOT INCLUDED

cheers

Mass

contact: 0424282720 or pm/post

here are some pics i took yesterday, ill take more later...

picture112hn9.th.jpgpicture113rt9.th.jpgpicture114nj7.th.jpgpicture1142xx3.th.jpg

massseatspf5.th.jpgpicture054hb2.th.jpgpicture004ik5.th.jpg

picture002gw5.th.jpgpicture002cj9.th.jpgpicture003aq9.th.jpg

Edited by mass_iv
Link to comment
https://www.sau.com.au/forums/topic/135233-fs-r34-gtr-seats/
Share on other sites

hehehe wil... i already have the standard ones :D

if i was after the stockies then id consider u wil...

but ill still pm u..

-MONA- u have always loved the seats lol...

oh woops HAPPY BIRTHDAY -MONA- :balloonsandstreamersandstuff:

w00t ur finally 30 :/

ok now someone buy my seats lol

had some interest but yeh

Edited by mass_iv

come on guys. you're being ridiculous! these seats are worth more than -MASS- is asking for them.. a swap for standard seats is just stupid and insulting! AND he has mentioned he has stock seats so no point offering more stock seats!

so i'm just going to hope you're joking!

lol its all good -MONA- no harm in offering... but yeh like i said im looking for cash!!!

as for wat they are worth... if i dont get 2k then ill keep them, not worth selling for less, seeing as i already knocked off $400 off their retail price and they are like new... worst case they go in the next car :/

lol its all good -MONA- no harm in offering... but yeh like i said im looking for cash!!!

as for wat they are worth... if i dont get 2k then ill keep them, not worth selling for less, seeing as i already knocked off $400 off their retail price and they are like new... worst case they go in the next car :O

yeah i know.. i have an emotional attachment to those seats :/ if i didn't have a rebuild to pay for, they'd be mine!

hmmm not sure yet anth... let me see how it goes if so then i will seperate them for ya...

id just rather get rid of them as one...

Edited by mass_iv

more pics added, also the seats are a little darker then wat they look like in the pics, the camera isnt showing their true colour :(

Edited by mass_iv

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
×
×
  • Create New...