Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Steve,

Who told you there was lots of space left? I spoke to Lloyd who is organising it and he said there is very little space left inside, hence only being able to put around 6 cars in. If you have been told otherwise that's great and we should make a decision quickly so we can book.

If we have to have a display inside and out I say we put 6 of the best modified cars inside and do the full model run outside. At both displays we can have signs telling people about the other display.

Summoner,

It's at Belmont Racecourse again.

I have spoken to Lloyd and we have definately got a spot inside booked. They are going out to Belmont next week to measure it up for us and will let me know how much space we have. From that we can work out how many cars we can fit, what display we will do etc... We have to provide all power cords, extension cords etc. They need to be taped to the floor, all cars on display need to have a cover underneath them for any leaks etc. The cost is $50 per car, this includes entry in the Show n Shine, Dyno Comp and driving events. The driving events are optional and numbers are limited.

Outside we can have as much space as we like, and pretty much do as we like. If we want (and can afford) to put a marque up we can. In terms of security overnight they are looking in to it and will advise.

What we will do is work out what cars will go into the show and fill in all the entry forms and submit them together as a club.

As was suggested maybe inside we can go the workshop theme with modded cars, and outside have a big display showing the range of Skylines we have in the club. Off the top of my head I thought of this list for outside:

Jash's old skooler

R30's (2 door , 4 door)

R31's (2 door, 4 door)

R32 GTST

R32 4 door

R32 GTS4

R32 GTR

R33 GTST

R33 4 door

R33 GTS4

R33 GTR

R34 GTT

R34 4 door

R34 GTR

That's 16 I can think of, plus the cars inside would take the total to around 22ish.

I think we have most models covered except for R34 GTR, anyone know someone who is willing to donate one for the show?? Wouldn't have the same impact without it I guess...

I'm happy to host a meeting at my place to work things out. What we can also do is over a couple of weeks have each model turn up at a set place and we can as a group decide which is the best example to put in the show. Let me know what you guys think but we should get this underway as time will pass pretty damn quick.

One other thing that will need to be decided is if the club members will all donate towards the display, or only the entrants will..

Midweek or weekends are ok for me to host a first meeting.

Cheers

Brett

ok i'll lend you guys my R34 GTR... :P

but seriously, we should have a meeting to work out the details on which cars will be displayed on the inside and outside. however, it would be handy to confirm the amount of space that we are able to work with

Thanks Jeff, hope you didn't think I was assuming we would have your car, just using it as an example... :mad: What's with the missing 'TT' from the end of that engine type dude!!!! ha ha ha

Are you putting a C-Red display on or is GTAAH available, (maybe even big red if ya still got her??)

Brett

Yeah bought the Autech DE from JMS. I was going to build up a stroker L Series, but by the time I did the sums the 26 worked out better. Big Red's motor is in GTAAH yeh and Big Red will be sold either stock or with a pair of RX6s. We'll have a display on yeah.

Jash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • what speedo healer did you use?  
    • Certainly. It is probably broken under the wire style clamp. At least that one is easier to get at than the front one.   Sounds like it isn't a major leak, I'd start with backing off the the water feed and return banjos into the turbos half a turn then tightening properly. Hardlines can still crack over time, either in the tube (particularly when turbos are changed if the banjo is siezed in the the tube) or at the brazed joins between the lines and the banjo fittings. A coolant system pressure test will reveal all. BTW you'd be able to get a sump without exchange, it will just cost more as they will have to source another stock one for the next customer. If you want to address the sump a much better option is something like this https://www.hioctanedirect.com/hi-octane-racing-sump-extension-nissan-rb26 that you weld in locally (and add the oil return fittings at the same time)
    • Pretty sure you are thinking of the throwout bearing there (which you should change when you change your clutch), when they are worn they will get quieter if you put your foot on the clutch. An input shaft bearing is turning/noisy at all times.
×
×
  • Create New...