Now This Is Hot!

[Grant]

Sorry, but after 19 hours my topic only had been viewed 7 times, so I had to make it sound more exciting! Can anyone help me out here?

Does anyone know if the front seatbelts from an R33 could be used in an R32?

[HiBread]

Nice bit of humor there mate, and deserves a bump!

Yeh, seatbelts aren't awefully exciting. I'd imagine most people wouldn't know the answer to your question, so probably best asking a seatbelt expert; someone who makes money selling seatbelts.

[darrinspencer]

Not sure why you want to change the belts, but if you want to use the R33 belt webbing in the R32 retractors you can

I have done this a few times on other cars, they all are pretty much the same design.

Remove the seatbelt from the car. Pull the belt out fully from the retractor. You should be now able to side the end of the belt out of the centre of the retractor and remove the plastic holding pin, and the belt will then come free.

Make sure you hold the retractor from spinning once the belt is removed. I normally slide a screw driver in the slot to hold it there. You can now side the R33 belt in the r32 retractor, refit the holding pin and slowly let the belt retract.

If you are changing the R32 retractor because it is not working, ignore what I just said.