Jump to content
SAU Community

Recommended Posts

Should be getting my exhaust soon and was wondering if it is necessary for wastegate integration as part of the system.

If there is no wastegate integration is there a chance of blowing the turbo up and has the stock exhaust got this integration.

Dont really know what Im talking about so please let me know.

Andrew

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/
Share on other sites

But with a wastegate pipe it improves............ the flow and reduces turbulence just after the turbine

turbulence i s the disruption of air ... if you have turbulence, then the air flow is not linear, and if the air isn't all going one way at the same time, you'll have a reduction in the flow and and increase in restriction

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-265811
Share on other sites

I recently got my dump pipe done and its been a fantastic improvement. I went with a single pipe with a really wide opening at the top. Having had a look at the standard pipe its obvious how much better this is. The stock one on the 32 has a cast iron flat section just about blocking the wastegate area off... its horrible.

A larger single pipe is probably enough for most people. And theres little guarantee it will be better if you buy one with a separate wastegate pipe. This is because it may rejoin too early or too late causing similar turbulence issues within the system.

You'll see improvements either way, however the difference between the 2 styles of dump pipes probably cant be felt on an arse dyno (only a real one).

Red17

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-266982
Share on other sites

I'm geting my exhaust done next week. I pikd up a exhaust housing gasket, $20 and have since taken to my exhaust guy. He is going to weld up a new plate and incorporate in a seperate wastegate dump.

the dump off the back of the turbo will be a rapid increase to 3', the wastegate pipe will be 1"1/2. The exhaust guy has recently done something similar to another GTST, but the wastegate pipe entered the system down near the cat convertor.

My question is - "is this TOO far back? I know the further back the better. But we are talkin about 1 - 1.5m here".

"should I also thermal wrap any of the dump pipe???"

btw full 3" zorst turbs bak with hi flo cat and rear muffy etc etc..

tks.....

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271177
Share on other sites

opposed to GTS-t VSPECs whos comes in at a right agle :)

Whether apart of the normal exhaust or a seperate screamer pipe, that joins back into the main exhaust at any section, or not at all.. wont hurt your turbo..

Id say the ultimate is an exhaust dump, one pipe with a secondary wastegate screamer which never enters back into the main pipe. Thats my next goal when the exhaust comes off..again.

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271415
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...