Jump to content
SAU Community

Recommended Posts

Should be getting my exhaust soon and was wondering if it is necessary for wastegate integration as part of the system.

If there is no wastegate integration is there a chance of blowing the turbo up and has the stock exhaust got this integration.

Dont really know what Im talking about so please let me know.

Andrew

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/
Share on other sites

But with a wastegate pipe it improves............ the flow and reduces turbulence just after the turbine

turbulence i s the disruption of air ... if you have turbulence, then the air flow is not linear, and if the air isn't all going one way at the same time, you'll have a reduction in the flow and and increase in restriction

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-265811
Share on other sites

I recently got my dump pipe done and its been a fantastic improvement. I went with a single pipe with a really wide opening at the top. Having had a look at the standard pipe its obvious how much better this is. The stock one on the 32 has a cast iron flat section just about blocking the wastegate area off... its horrible.

A larger single pipe is probably enough for most people. And theres little guarantee it will be better if you buy one with a separate wastegate pipe. This is because it may rejoin too early or too late causing similar turbulence issues within the system.

You'll see improvements either way, however the difference between the 2 styles of dump pipes probably cant be felt on an arse dyno (only a real one).

Red17

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-266982
Share on other sites

I'm geting my exhaust done next week. I pikd up a exhaust housing gasket, $20 and have since taken to my exhaust guy. He is going to weld up a new plate and incorporate in a seperate wastegate dump.

the dump off the back of the turbo will be a rapid increase to 3', the wastegate pipe will be 1"1/2. The exhaust guy has recently done something similar to another GTST, but the wastegate pipe entered the system down near the cat convertor.

My question is - "is this TOO far back? I know the further back the better. But we are talkin about 1 - 1.5m here".

"should I also thermal wrap any of the dump pipe???"

btw full 3" zorst turbs bak with hi flo cat and rear muffy etc etc..

tks.....

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271177
Share on other sites

opposed to GTS-t VSPECs whos comes in at a right agle :)

Whether apart of the normal exhaust or a seperate screamer pipe, that joins back into the main exhaust at any section, or not at all.. wont hurt your turbo..

Id say the ultimate is an exhaust dump, one pipe with a secondary wastegate screamer which never enters back into the main pipe. Thats my next goal when the exhaust comes off..again.

Link to comment
https://www.sau.com.au/forums/topic/13590-wastegate/#findComment-271415
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Standard GTRs are boring and there plenty of them, do what ever you want to it and just remember nothing about them is cheap anymore and if you’re picky about how you want things done it gets even worse.    if it’s an n1 or something very limited then maybe care more about it’s heritage 
    • Alright guys, I've got good odds the motor survives due to a majority of spare parts. Who's taking bets on clutch, who's on transmission, and who's go diff? Happy to also take bets on if it still overheats in traffic or not 😛     Car looks amazing by the way. I've never been a fan of R34 rears, so really, I don't think any body kit etc solves that for myself, but the front end looks amazing!
    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
×
×
  • Create New...