Jump to content
SAU Community

Recommended Posts

Hey all,

I have the stock TV/CD/Sat Nav system which is playing up. I use it to play CD's and I think she is packing it in.

Sometimes the screen will not come up, then 15mins later, it beeps and POPs up, when it does come up and plays CD's after a while the screen freezes and music stops. Turn car off it goes back down but then will not come up again

Could this be a loose connection or a fuse? Where is the best place to start looking?

Cheers,

Daz

Edited by DazR34
Link to comment
https://www.sau.com.au/forums/topic/135931-r34-stock-tvcdnav-issues/
Share on other sites

  • 2 months later...
  • 2 weeks later...

I had the exact same problem with mine. After a while the system decides to not work completely (instead of freezing up after 10-15 minutes). Just recently the screen has started to pop up every time the car is started up... with an error message in japanese.. i think it is somthing along the lines of "please contact the program desk"

I'm completely bummed about it.. to it to a car stereo guy over here in WA and he was completely clueless.

Is there definitely nothing that can be done?

Does anyone have any suggestions as to what other system can be put in so the i can keep the motorised pop up screen?

  • 1 month later...

I can make the motorised screen work up and down without the gps deck controller..

but not the nav..

I got switch to make it move and remove the tv and swap it to my MIO handheld GPS..Its easy if u can find tv about that size to replace

i post a pic if u want..

had problems with my old 34 as well..screen didnt pop up but it constantly beeps non stop for like 5mins which like fkn happens almost everytime i drive..

hahahaha...nick u don even hav the nav anymore

yea put up some pics...wanna see ur good work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...