Jump to content
SAU Community

Recommended Posts

Hi all. I am after response and a dyno sheet for the following turbos or some testamonial.

I have an RB20 and am going to go either the RB20 hiflow or the RB25 hiflow for the RB20.

on his site it says "1 bar from as little as 3000rpm" and flows enough for 200+ rwkw.

does anyone have some figures from a slide hiflow on an RB20. I have found heaps of info on them for RB25s but not the ole 20.

If I have searched and missed please point me in the right direction!

I am not trying to start a shitfight. just need teh info :)

what max power will the rb20 hiflow make and what max power will the rb25 hiflow make?

thankyou

Edited by CEF11E
Link to comment
https://www.sau.com.au/forums/topic/135983-sliding-hifolw-on-an-rb20/
Share on other sites

1 bar at 3000rpm could only be done on an rb25 min... Plus it would have to have an EBC to get it there that quick...

I had a high flow GCG (which is a ball bearing one) on one of my rb20's and it hit 1.2bar at 4200rpm and thats with extensive mods.

I would extimate that a highflow on a stock rb20 would reach 1 bar at approx 4800rpm...

Hey guys

I did not even realise that i had writen 3000rpm in the items description.

I have seen them create 1 bar of boost on the rb20 highflow at 3600rpm with just a power fc, electronic boost controller,cam gears and the usual supporting modifications.

Sorry about the misleading information it has been changed now.

Obviously different cars will react differently depending on modifications.

The ratio of RB20 turbo's sold to Rb25's is a very large difference with around 1 being done to around 40 rb25-VG30 highflows as everyone generally just upgrades to the RB25 turbo and highflow that.

:blink: Aaron

yep I thought it was a bit optamistic.

Slide do you have a dyno sheet of any of your turbos on an RB20?

Really I want about 210 at the wheels for my daily driver. Will the RB20hiflow be capable of this.

List of exact mods the car will have

GTR injectors

GTR fuelpump

Z32 AFM

Remapped ECU

batmbl split front dump

metalcat 3" hiflow cat

kakimoto 3" catback

Blitz FMIC

I will want to run about 16 psi

yep I thought it was a bit optamistic.

Slide do you have a dyno sheet of any of your turbos on an RB20?

Really I want about 210 at the wheels for my daily driver. Will the RB20hiflow be capable of this.

List of exact mods the car will have

GTR injectors

GTR fuelpump

Z32 AFM

Remapped ECU

batmbl split front dump

metalcat 3" hiflow cat

kakimoto 3" catback

Blitz FMIC

I will want to run about 16 psi

With the mods listed above I don't see why not.

yep I thought it was a bit optamistic.

Slide do you have a dyno sheet of any of your turbos on an RB20?

Really I want about 210 at the wheels for my daily driver. Will the RB20hiflow be capable of this.

List of exact mods the car will have

GTR injectors

GTR fuelpump

Z32 AFM

Remapped ECU

batmbl split front dump

metalcat 3" hiflow cat

kakimoto 3" catback

Blitz FMIC

I will want to run about 16 psi

I dont have a dyno sheet for either the RB20 highflow or the RB25 highflow on a RB20 as they are not a huge seller and i have just received feedback from customers and cars i have helped on the dyno.

The RB25 highflow will be able to get you 210 alot easier then the RB20 highflow which is why most go fot the 25.

A RB25 turbo elbow is required though as the RB20 elbow will not fit the 25 turbo.

Aaron

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • As above, replace as many as you can afford. If anything, due to old age.
×
×
  • Create New...