Jump to content
SAU Community

Need To Buy, Series 1, Coil Ignitor

WogsRus

By WogsRus,
in Tasmania

 Share

Recommended Posts

WogsRus Veteran

WogsRus

Posted
Posted

Well i've decided to got to a wasted spark setup, going to cost no more then $150 all up with new coils and leds ect.

HOWEVER i need a series 1 ignitor as i have a series 2 so i can't make it work.

If somone has one to give away or sell, they are only $50 new, so i don't want to spend that much, give me a whola and i come get it.

YYEEHHHHAAA

SO that is SERIES 1 IGNITOR

Link to comment
https://www.sau.com.au/forums/topic/136086-need-to-buy-series-1-coil-ignitor/
Share on other sites
mid life crisis Veteran

mid life crisis

Posted
Posted

$50 new who are you kidding u pay more than that for a good second hand one ive seen 2nd hand ones go for a 100 bucks .mate if there only 50 new dont scab out just buy a new one

WogsRus Veteran

WogsRus

Posted
  • Author
Posted

ok, so i underestimated SPARCo about the cost, called nissan and a new one is $250.

But it looks like the RB20 ignitor is thesame, and i can get a second hand one for 40 dollars.

I'm going to Automotive Solutions in Campbell st to see what they have, and see what i can build up.

I think i am going to go for AU S1 Coils, look much better plus have a nice and tidy plug connection.

BUT if anyone has an ignitor for S1 R33 or an R32 give me a whola

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      After market rear camber arm adjustment

      By sonicii · Posted

      How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...