Jump to content
SAU Community

Recommended Posts

[/b] Hi Guys,

My name's Kylee...This my first post on this fourm....Just got rid of my Vl which i had for over three years and decided I needed somethin a little newer and a bit quiker. So I bought a 94 R33 GTST and was just wondering if anyone can give me the correct specs of this make (Inc kw's). I was also curious to know whether or not they come standard with LSD, I have been told many different answers. Also, just wanted to know what the HICAS light means, I know what it stands for but it keeps comin up after i have driven the car for a while. I have been told its nothin to worry about and someone even mentioned theirs stays on the whole time cos they have a non standard computer? Anyway, my car is pretty much standard and I just had it dynoed and it has 158kw's so i was curious to know how many kw's they came out with :(

Link to comment
https://www.sau.com.au/forums/topic/136240-specs-of-a-r33-gtst/
Share on other sites

they came with 184kw (manual gearbox). that is at the flywheel, not the wheels. any power figure quoted by a manufacturer is at the flywheel.

and yes they come standard with lsd, but there is 2 types of lsd. most have the standard viscous lsd. some have the active lsd.

Edited by mad082
should these questions have come before you bought the car?

No, because i would have bought the car anyway. I was just curious... having answered these questions before I bought the car would have been irrelavant. Knowing how many kw's they come standard with and if they have LSD would not have changed my mind about buying one.. things can always be changed on it anyway!

hi kylee,

um good question i was also after specs on mine stocko. I have simlar model to Yours. .. i found this in the forum. One of the guys here made it, (great work btw), check it out here. http://nissanskyline.6te.net/

got loads of info on skylines stock.. um i think they were 147rwkw stock btw.

cheers

Oh ps. Hicas light comming on. isnt normal. mine comes on occasionally, (hicas diagnostic mode) where light comes on and steering tightens.. but i disconnect battery for about 15 mins, then reconnect, and its ok. I think probably sensor issue. But No mechanics or performance shops ive been too so far can figure it out. so good luck with that one. but first think is to disconnect battery, hicas fuse, Hicas computer, and check all sensors. and clean connections. if u can find someone who knows how to troubleshoot the system properly. let me know. :P

Edited by silverbulletR33
they came with 184kw (manual gearbox). that is at the flywheel, not the wheels. any power figure quoted by a manufacturer is at the flywheel.

and yes they come standard with lsd, but there is 2 types of lsd. most have the standard viscous lsd. some have the active lsd.

187kw for series 2

and less than 184 for auto R33's

Thanks guys for the input.

The hicas still came on when i had the standard steering wheel though.

I now realise after looking at the other sites that i make the extra power at the wheels from standard because i have the exhaust upgrade. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...