Jump to content
SAU Community

Recommended Posts

MODS are:

Stock boost controller solenoid grounding (disable dual stack boost)

600 x 300 x 76 Hybrid copy cooler

Apexi air filter (no CAI)

(2.5 or 3)inch SS front/dump pipe with split from Batmble

3.5inch Apexi CATBACK (Stock CAT)

Excedy heavy duty clutch

Recently rebuilt stock Diff

Stock turbo, ECU, injectors, fuel pump

No internals

Here is the result

post-22920-1159374806.jpg

Looking at the AFR apparently the its meant to drop to 12 under load, so its leaning abit. Only by 1pt so I dont think its too dangerous... I can still give it the odd thrashing but I prob will be too scared too.

I reckon the fuel pump is being maxed out coz injectors should be able to handle it and i can't think of nething else. What are ur thoughts ppl?

A special thanx also to RAY from RE customs, he is seriously a top bloke. The most trustworthy mechanic I have ever known... and ive known alot.

P.S. forgot to mention that boost reached 8.5psi (stock boost controller and actuator)

Edited by Taso84
  • Replies 113
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

1 AFR is a lot...

In my opinion that is far to lean and seriously risking detonation with even a slight batch of bad fuel or a hot day/hard thrash.

I would suggest that the person that tuned your car doesn't really care about it blowing up unless he is not really sure what he's doing because that is seriously lean. I would almost bet that a few laps on the track and it would be the end.

If you buy a power fc or at least buy a safc that will have the problem solved :D

Actually, if you want to do it on the cheap, you might even get away with a fuel pressure reg as that will add fuel everywhere which is what you need.

MODS: Please edit post if I have written something inappropriate.

Thats pretty amazing, I have almost the same power mods (no FMIC) on a GTT and am only getting 165.

I dont know whether this is true but an AFR of 13 might be a little dangerous, I think 1 point is actually quite a difference.

Great result anyways dude

Yeah methinks the number is not realistic but that's not important. If that is right it is running way too lean and death is only around the corner.

I would expect the AFR's to get gradually leaner if the fuel pump was no good but they are like that right the way across.

What colour is your exhaust? Is it grey or black? If grey try to describe the shade.

if you look at how much it is leaning out, i could say that thats about right.

i got 204kw out of the same mods but with 11psi. straight after i went on my mate went on with his 33. same mods, same dyno operator and he got 175kw. some cars just make more than others.

Thats an impressive power output for such little mods... my completely stock R33 with only a full exhaust and split dump got 165rw/kw (7psi).. ill be putting a FMIC, 10psi and PFC + tune at the end of the year... i hope I hit 200+rw/kw

you have to ask how it is running so lean with the stock ecu and no piggyback... my tip would be dying fuel pump

What he said.

Do your pump and FPR and you'll be safe to run that consistently. I wouldnt even crank uop the boost for fear of R&R. Congrats on haveing one of the better 33's. Mine is like that too. I got 180 only with a cat back and pod.

if the AFR is lean, then its lean.

even with 45% correction applied or being in the wrong shoutmode the car is still too lean. this would explain the power it is making. fix the leaning out and youll go back to around 170rwkw i would expect

Yeah methinks the number is not realistic but that's not important. If that is right it is running way too lean and death is only around the corner.

I would expect the AFR's to get gradually leaner if the fuel pump was no good but they are like that right the way across.

What colour is your exhaust? Is it grey or black? If grey try to describe the shade.

well its meant to go down to 12AFR and stay there so If the pump is maxing out y would the AFR keep rising?

Not sure wat colour exhaust is but recently when some1 was driving behind me they said i blew abit of smoke when i gassed it like i was running rich or something.

if the AFR is lean, then its lean.

even with 45% correction applied or being in the wrong shoutmode the car is still too lean. this would explain the power it is making. fix the leaning out and youll go back to around 170rwkw i would expect

yea... this is wat Ray said too

yeah if your floor, its going to pretty much run rich straight away

as long the as the smoke is black its ok, just rich and thats the stock ecu so its normal (ish).

its either the pump or the fpr, try the pump

it sounds likely. mine was leaning out around 180rwkw

well its meant to go down to 12AFR and stay there so If the pump is maxing out y would the AFR keep rising?

Not sure wat colour exhaust is but recently when some1 was driving behind me they said i blew abit of smoke when i gassed it like i was running rich or something.

The leaner it gets the higher the number.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...